Outdoor Temperature Transmitter Basic 0-10 V

Our rugged and reliable outdoor temperature transmitter is an ideal choice for outdoor areas that require a compact, shockproof and easy-to-install temperature monitoring solution. Thanks to its fixed Pt1000 RTD sensor, temperature is measured accurately. With the standardized 0-10 V signal at the output, it can be seamlessly integrated into existing heating systems and control systems. It is characterized by its high measurement accuracy and long-term service life, even under difficult operating conditions. The integrated alarm functions, including sensor break, sensor short-circuit and measuring range monitoring, ensure correct temperature measurement and transmission and provide additional safety.The transmitter can be parameterized quickly and easily using DIP switches.

Here you can find our downloads for Outdoor Temperature Transmitter Basic 0-10 V

	Data sheet Outdoor Temperature Transmitter Basic 0-10 V
	Instruction manual Outdoor Temperature Transmitter Basic 0-10 V
	Operating instruction Outdoor Temperature Transmitter Basic 0-10 V
	Declaration of Conformity Outdoor Temperature Transmitter Basic 0-10 V

Outdoor transmitter - Special features
Inputs and outputs					Input: Pt1000 resistance sensor, permanently installed output: 0 to 10 V
Accuracy & Long-term stability					Accuracy: high measuring accuracy Long-term stability: long service life with flexible application possibilities
Design					Compact, robust, vibration and shock resistant design Easy mounting thanks to innovative twist-cover closure / bayonet lock
Parametrization					Simple and super-fast parameterization thanks to preset dip switches
Alarm function					Sensor break monitoring Sensor short-circuit monitoring Measuring range monitoring
Outdoor transmitter - Measuring element
Measuring element		Norm			Configurable measuring range						Accuracy
Pt1000		IEC 60751			-200 °C to +850 °C | -328 °F to +1562 °F						±0.3 °C + 0.1 % of the measuring span
Connection type					2-wire (permanently installed)
Outdoor transmitter - Output
Output type					analog, temperature linear for RTD
Output signal					0 to 10 V
Parametrization / Scaling					Configurable via DIP-Switch
Resolution					16 bit dac
Accuracy (°C)					0,1
Load					500 Ω at 24 VDC
Connection type					3-wire and 4-wire
Outdoor transmitter - Time response
Closing time (s)					≤ 5
Heating period					The specified accuracy is reached after max. 4 minutes
Signal attenuation (s)					0 – 30
Measuring cycle (s)					<0,25 ( < 4 Hz )
Response time					Depending on sensor type
Outdoor transmitter - Sensor monitoring & sensor error
Sensor failure effects					according to NAMUR NE43
Outdoor transmitter - Alarms
Sensor error					0 - 10 V
Sensor Status					11 V
Sensor short circuit					11 V
Outdoor transmitter - Measured values outside the measuring range
Sensor Status					0 - 10 V
Min. measured value					0 V
Max. measured value					10 V
Underrange					0 V
Overrange					10,5 V
Outdoor transmitter - Accuracy and stability
Cold junction compensation
Cold Junction Compensation					±0,3 – 0,5 °C (NTC 5K)
Temperature influence					±0,01 °C per °C
Influence of the sensor cable
RTD and resistance (2-wire)					Negligible
Further data
Supply voltage influence					Within specified limits
Outdoor transmitter - Type
Dimensions (mm)					135 x 60 x 34 (see drawing)
Material | Flammability					ABS white RAL 9010 UV resistant, RoHS compliant
Mounting					Enclosed mounting kit (housing)
Connection					Single wires, max. 1,5 mm², AWG 16
Weight (g)					75							All dimensions in mm
Outdoor transmitter - Protection sleeve
Material					Stainless steel 1.4404 | 316L
Diameter (mm)					6
Outdoor transmitter - General data
Isolation					none
Supply Voltage (VDC)					12 to 36, polarity protected
Outdoor transmitter - Ambient conditions
Ambient Temperatur					Storage: -20 °C to +70 °C (housing) | Operating: -20 °C to +70 °C (housing)
Humidity (%rH)					0 to 98 (non-condensing)
Protection					Housing IP65
Outdoor transmitter - EMC
Standard					Directive: 2014/30/EU | Harmonized standards: EN 61326-1:2013
Outdoor transmitter - Factory configuration
Input					Pt1000 fixed
Scaling					-20 °C to +50 °C
Output					0 - 10 V
Outdoor transmitter - Mounting
Thanks to the four slotted holes, the housing can be easily mounted on the wall. The openings for the screws are located outside the protective space for the electronics, so no sealing is required. With the cable compression glands, sealing to the probe or data cable is guaranteed even for different diameters. Mounting material for the installation of the transmitter (screws and dowels) are included with the transmitter as free accessories. A large assortment of temperature probes and connecting cables is also available as an option. Important: To prevent measuring errors, the connecting screws for fastening the connecting cable must be firmly tightened.
Open the rotary cover.
You can parameterize your temperature transmitter and set the scaling via the DIP switches. Please use the information from the parameterization table.
Mount your outdoor probe with sufficient distance to vents, windows or doors and preferably on the north wall, alternatively on west or east wall of the building. Avoid direct sunlight and rain. Use Sun Protection if necessary. Please lay the cables downwards so that rainwater can drip off in a defined way. Please consider the permissible ambient conditions during installation.