Pressure transmitter high 0-10 V with display

The pressure transmitter high 0-10 V with display is suitable for precise measurement and direct display of pressure differences in gaseous and liquid media. The rotatable and tiltable display module allows flexible alignment and clearly shows measured values and device settings. Typical areas of application include building automation, mechanical engineering, and the monitoring of ventilation and filter systems. The compact housing with G 1/8" process connections offers protection class IP65. Installation is carried out using the supplied bracket, and the mounting position can be freely selected.

Here you can find our downloads for Pressure transmitter high 0-10 V with display

	Data sheet Pressure transmitter high 0-10 V with display
	Instruction manual Pressure transmitter high 0-10 V with display
	Declaration of Conformity Pressure transmitter high 0-10 V with display

Pressure transmitter - Supply and output
Output					0 - 10 V
Load					Rl > 10 kOhm
Insulation resistance					≥ 100 Mohm, at +20 °C (500 V DC)
Voltage supply					24 V AC (+ 15 % / – 10 %) | 18 - 33 V DC
Connection type					3-Wire
Pressure transmitter - Pressure
Pressure type					Differential pressure
Measuring principle					Ceramic measuring cell (no separate pressure transmitter required)
Pressure range selectable					0 bar to 0,1 bar 0 bar to 0,5 bar 0 bar to 1 bar 0 bar to 2,5 bar 0 bar to 4 bar 0 bar to 6 bar 0 bar to 10 bar
Accuracy pressure					Total error < 1.3%
Response time					< 5 ms
Class					0,5 %
Total error					< 1,3 %
System pressure					max. 25bar (P1+P2)
Burst pressure					1.5 x system pressure
Overload					dependent on pressure range
Pressure transmitter - Ambient conditions
Storage temperature					-40 °C to +85 °C
Operating temperature					-10 °C to +80 °C
Medium temperature					-15 °C to +80 °C
Medium					liquid and gaseous
Long-term stability					Approximately 15 years, significantly longer under laboratory conditions
Pressure transmitter - Certifications / Standards
Protection class					III (according to EN 60 730)
Protection type					IP 65 according to EN 60 529
Standards					CE conformity according to EMC Directive 2014/ 30/ EU
Pressure transmitter - Technical drawing
Pressure transmitter - Body
Material					Stainless steel 1.4305 | SUS 303
Dimensions (L/W/H) (mm)					224 x 128 x 43,3
Color					Black, red
Pressure connection					Pipe fitting for 6 mm pipe (G 1/8” - 27 NPT internal thread)
Electrical connection					0.25 - 1.5 mm², via plug connector DIN EN 175301-803-A (included in the scope of delivery)
Wetted parts					INOX (1.4305), ceramic, EPDM seal
Process connection					using mounting bracket
Pressure transmitter - Display module
Material					Plastic, UV-resistant Material: PC/ABS, 30% glass bead reinforced
Dimensions (L/W/H) (mm)					72 x 67 x 43,3
Color					Black (similar to RAL9004)
Closure					with quick-release screws
Display					Display module can be rotated and tilted For displaying the actual pressure, min/max pressure or standard signal of the sensor
Cut-out Display (B/H) (mm)					ca. 36 x 15
Display content					Pressure [bar] [kPa] [psi] [inWC] [mWC] [atm], voltage [V] or current [mA]
System of units					SI and Imperial (display configurable)
Pressure transmitter - Important assembly instructions
Important assembly instructions					Using mounting bracket (included in delivery), installation position optional
Installation is carried out using the supplied bracket in any mounting position. The compact housing allows easy integration into a wide range of applications. Before commissioning, check the pressure and electrical connections for leaks and correct connection.
Pressure transmitter - Delivery
Delivery					Transmitter, Operating instructions, Mounting bracket
Packing					individually packed in cardboard box