Ring contact probe Type K

The Ring Contact Probe Type K enables precise surface temperature measurements up to 350 °C, making it ideal for use in machinery and equipment manufacturing. Thanks to the Type K thermocouple and its robust design, it can be easily mounted on smooth surfaces using a screw connection. The temperature limit of 350 °C is due to the use of a glass silk cable, which is designed for high-temperature applications. More about surface temperature measurement

Here you can find our downloads for the Ring contact probe Type K

	Data sheet Ring contact probe Type K
	Instruction manual Ring contact probe Type K
	Operating instruction Ring contact probe Type K
	Declaration of Conformity Ring contact probe Type K

Surface thermocouple - General Information
Measuring range					-50 °C to +350 °C
Perm. °C range cable					-50 °C to +350 °C
Accuracy					-40 °C to +375 °C: ±1,5 °C according to DIN IEC 60584 Class 1
Surface thermocouple - Supply and output
Measuring element					Thermocouple Type K
Measuring point					Measuring point not isolated
Measurement signal					Thermovoltage
Surface thermocouple - Ambient conditions
Protection class					IP20 according DIN 60529
Humidity and moisture condensation resistance					according to application-specific qualification
Surface thermocouple - Certificates and Standards
Standards					DIN EN 61326-1:2013 | DIN EN IEC 63000:2019-05
Directive					RoHS 2011/65/EU | 2014/30/EU
Surface thermocouple - Technical Drawing
												E - Material connection cable
												F - Length connection cable
												G - Connector
												All dimensions in mm
Surface thermocouple - Contact body
Contact geometry					Ring
Material					Stainless steel 1.4305 | SUS 303
Length (mm)					8
Height (mm)					1,5
Inner diameter					4,2
Surface thermocouple - Thermocouple cable
		Type			Color	Material (Outside / Inside)			Perm. range °C			Ø Outside (mm)		Cross section (mm²)	Color strand	Ω / m
		Thermocouple cable			Type K1}	Glass fibre / Varnish			-50 to +350			2,1 ± 0,2		0,75	gn, wt	4,52}
Length (m)					1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC | 1}Color according to IEC 584 | 2}per thermocouple | Cable available as accessory
Surface thermocouple - Connector
					Insulated end ferrules (50 mm)
					Mini-TC connector (molded) Typ K bk
Surface thermocouple - Delivery
Assembly instructions					by means of screw fastening
Delivery and Packaging					Probe, Instruction manual, seperatly packaged in PE bag
Matching accessories					Heat-conducting paste
Surface thermocouple - Important assembly advices
					The surface must be polished and free of residue. Please attach the probe firmly. Please ensure good thermal contact and use thermal conduction paste if necessary. Depending on the requirements, it may be advisable to insulate the probe to minimize the influence of the ambient temperature.