The dew point monitor 0–10 V + switching contact combines continuous humidity measurement with an adjustable switching output in a compact device. It reliably detects critical humidity conditions and the resulting dew point temperature on cold surfaces such as cooling ceilings or cold water pipes and outputs both an analog output signal (0–10 V, continuously from 0% RH to...

The dew point monitor 0–10 V + switching contact with display combines continuous humidity, temperature, and dew point temperature measurement with an adjustable switching output and a clear display. The analog output covers the range from 0 to 100% RH, while the switching point can be set between 75 and 100% RH using a potentiometer (factory setting: 75% RH). Integrated...

The dew point monitor switching contact is mounted directly on cold surfaces such as cooling or cold water pipes and reliably detects impending condensation based on temperature, humidity, and dew point measurements—without the use of conductivity sensors. The switching point can be set between 75 and 100% RH using a potentiometer (factory setting: 75% RH), with integrated...

The dew point monitor switching contact with display reliably detects the formation of condensation on cold surfaces such as cooling ceilings or cold water pipes. It measures temperature, relative humidity, and the resulting dew point temperature with high accuracy—without any conductivity-based sensors—and automatically activates the integrated switching output via a...

The dew point monitor switching contact with external circuit board provides reliable protection against condensation forming on cold surfaces such as cooling pipes or cooling ceilings. The device measures temperature, relative humidity, and the dew point temperature calculated from these values—without any conductivity-based sensors—and thus detects critical humidity...

The dew point monitor switching contact with external circuit board and display offers reliable protection against condensation forming on cold surfaces such as cooling pipes or cooling ceilings, combining an external circuit board with an easy-to-read display. The external sensor unit allows flexible installation in hard-to-reach or particularly sensitive locations, while...

The differential pressure switch is used for reliable monitoring of differential, overpressure, or underpressure in air ducts and supply and exhaust air systems with non-aggressive, non-flammable gases. The switching point is factory-calibrated and can be precisely adjusted using an internal scale. Depending on the version, the device is equipped with a mounting bracket or...

Our duct humidity transmitter with 0-10 V voltage output features a robust plastic housing with a practical snap-on lid. The device reliably measures humidity and optionally temperature, with four switchable temperature measuring ranges available. The relative humidity is precisely recorded by a digital humidity sensor housed in a durable plastic sintered filter. The...

Our channel humidity transmitter with 4-20 mA current output offers a robust plastic housing with a practical snap-on lid. The device reliably measures humidity and optionally temperature, with four switchable temperature measuring ranges available. The relative humidity is precisely measured by a durable, digital humidity sensor housed in a robust plastic sintered filter....

Our channel humidity transmitter High with 0-10 V voltage output offers a robust plastic housing with quick-release screws. The device reliably measures humidity and optionally temperature, with four switchable temperature measuring ranges available. The relative humidity is precisely recorded by a digital humidity sensor housed in a durable plastic sintered filter. The...

Our channel humidity transmitter High with 4-20 mA current output offers a robust plastic housing with quick-release screws. The device reliably measures humidity and optionally temperature, with four switchable temperature measuring ranges available. The relative humidity is precisely measured by a digital humidity sensor housed in a durable plastic sintered filter. The...

Our channel humidity transmitter High with 0-10 V voltage output and display offers a robust plastic housing with quick-release screws. The device reliably measures humidity and optionally temperature, with four switchable temperature measuring ranges available. The relative humidity is precisely recorded by a digital humidity sensor housed in a durable plastic sintered...