Quality directly from the manufacturer
Long-term stable temperature probes over years
Advice directly from experts
 

Cable probe tapered with PFA cable

€38.50 *

Prices incl. VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to GER (AT +1 workdays)

Repeated order: check settings carefully and change if necessary.
1.Jetzt konfigurieren und bestellen
A - Messelement
keine Auswahl
(A011) Pt100 Klasse A
(A012) Pt100 Klasse B
(A013) Pt100 1/3 Klasse B
(A014) Pt100 1/10 Klasse B
(A022) Pt500 Klasse B
(A031) Pt1000 Klasse A
(A032) Pt1000 Klasse B
B - Anschlussart
(B2) 2-Leiter
(B3) 3-Leiter
(B4) 4-Leiter
E - Material Anschlussleitung
(E5500) PFA/PFA (2 x 0,22 mm²)
(E5501) PFA/PFA (3 x 0,22 mm²)
(E5503) PFA/PFA (4 x 0,22 mm²)
F - Länge Leitung
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
G - Stecker
(G01) isolierte Aderendhülsen
(G01) isolierte Aderendhülsen
(G01) isolierte Aderendhülsen
H - Knickschutz
(H0) Ohne (Standard)
(H1) Metall-Knickschutzfeder
2.Wie viele Fühler benötigen Sie?
Price calculation
Basic price
€38.50
A - Messelement:  
B - Anschlussart:  
E - Material Anschlussleitung:  
F - Länge Leitung:  
G - Stecker:  
H - Knickschutz:  
Menge:  
Configuration is incomplete - please check it!
  • 803571-1011
Our Payments
MasterCardPayPalInvoiceVISAPrepayment

Advantages

  • Advice directly from experts
  • Quality directly from the manufacturer
  • Long-term stable temperature probes over years
  • B2B customers welcome: All information here
Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
The cable probe with tapered measuring tip uses a protection sleeve that tapers from a diameter... more
Product information "Cable probe tapered with PFA cable"

The cable probe with tapered measuring tip uses a protection sleeve that tapers from a diameter of 6 mm to a diameter of 3 mm. This allows it to be used at smaller measuring points, achieves a fast response time and is waterproof. (IP67)

Here you can find our downloads for the Cable probe tapered with PFA cable

pdf-download Data sheet Cable probe tapered with PFA cable
pdf-download Instruction manual Cable probe tapered with PFA cable
pdf-download Operating instruction Cable probe tapered with PFA cable
pdf-download Declaration of Conformity Cable probe tapered with PFA cable
 

Cable probe - General Information

Measuring range -50 °C to +200 °C depending on sensor Type and connection cable
Perm. °C range cable -50 °C to +260 °C
Accuracy depending on sensor Type
Response time t63 / t99: information is available on request
Pull-out force ≥ 30 N
                                       

Cable probe - Supply and output

Max. measurement current max. 1 mA
Supply voltage approx. 5 V depending on measurement current
Measurement signal passive (resistance value)
 

Cable probe - Ambient conditions

Protection class IP67 according DIN 60529
Humidity and moisture condensation resistance according to application-specific qualification
 

Cable probe - Certificates and Standards

Standards DIN EN 61326-1:2013 | DIN EN IEC 63000:2019-05
Directive RoHS 2011/65/EU | 2014/30/EU
Certificates Certificate of suitability (on request)
 

Cable probe - Technical Drawing

A - Measuring element
B - Connection Type
E - Material connection cable
F - Length connection cable
H - Bend protection
G - Connector
All dimensions in mm
 

Cable probe - Measuring element

Measuring element Perm. range °C Accuracy / Tolerance resistance
Pt100 -50 °C to +400 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt100 -50 °C to +300 °C Class A dT = ±(0,15 °C + 0,002|t|)1}
Pt100 -50 °C to +200 °C 1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005|t|))1}
Pt100 ±0 °C to +100 °C 1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005|t|))1}
Pt500 -70 °C to +500 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt1000 -50 °C to +400 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt1000 -50 °C to +300 °C Class A dT = ±(0,15 °C + 0,002|t|)1}
1} according to IEC 751 / EN 60751 | Please note that the measuring range depends on the measuring element and the connection cable.
 

Cable probe - Possible connections

Measuring element 2W 3W 4W
Pt Checkmark Checkmark Checkmark
 

Cable probe - Protection sleeve

Material Stainless steel 1.4404 | 316L
Diameter (mm)1} 3 / 6
Length (mm) 55,0 / 74
1} Tolerance ± 0,1 mm
 

Cable probe - Material connection cable

Color: white, Perm. range °C: -50 to +260
Material (Outside / Inside) Ø Outside (mm) Cross section (mm²)2} Color strand Ω / m1}
PFA / PFA 2,4 ± 0,2 2 x 0,22 rd, wt 0,09
PFA / PFA 2,4 ± 0,2 3 x 0,22 rd, wt, rd 0,09
PFA / PFA 2,7 ± 0,2 4 x 0,22 rd, wt, rd, wt 0,09
Length (m) 1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC | Cable available as accessory | 1} per single strand | 2} Tolerance ± 0,03 mm²
 

Cable probe - Connector

Insulated end ferrules (50 mm)
 

Cable probe - Bend protection

Version Without (Standard), Metal bend protection
Length (mm) 50
Material Stainless steel spring 1.4310 | SUS 302
 

Cable probe - Delivery

Assembly instructions by using compression fitting or immersion sleeve
Delivery and Packaging Probe, seperatly packaged in PE bag
Matching accessories Immersion sleeve, Heat-conducting paste, Compression fitting, Quick-release strap
 

Cable probe - Important assembly advices

Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached

Installation by means of compression fitting: Please tighten the union nut of the compression fitting by hand as far as it will go (clearly noticeable). For compression fittings with PTFE pressure ring, please make a 1/4 turn with a wrench suitable for the width across flats. These compression fittings can be used several times in this way. In the case of compression fittings with stainless steel cutting ring, the compression fitting connects to the protection tube. This connection is pressure resistant up to 40 bar. However, the compression fitting can only be used once. It must also be tightened more firmly. Please tighten it with 1 3/4 turns.

Mounting by using an immersion sleeve (4): Please note that the Ø and the length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times.

Please lay the cable with reserve loop (4) and in such a way that no water can penetrate the sensor head. This allows you to extend the probe without disconnecting the electrical connection.

 

Qualification measurement series to ensure the function of our temperature probes over their service life

Qualifizierungsmessreihe Robust even with temperature changes Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more. Checkmark
Qualifizierungsmessreihe Resistant to heat and humidity Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified. Checkmark
Qualifizierungsmessreihe Long-term stable in any weather Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification. Checkmark
Qualifizierungsmessreihe Robust even under high vibration load Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g). Checkmark
Qualifizierungsmessreihe Reliable in practice: high pull-out force The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures. Checkmark
Qualifizierungsmessreihe Efficient through short response time Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times. Checkmark
Qualifizierungsmessreihe Corrosion-resistant even in salt spray Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years. Checkmark
Checkmark

Applicable for this probe type

Eigenschaften
Measuring elements: Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
industry: Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Refrigeration, White goods
Temperature range: -50 °C to +260 °C
Connection type: 2-Wire, 3-Wire, 4-Wire
Material cable: PFA
Related links to "Cable probe tapered with PFA cable"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "Cable probe tapered with PFA cable"
Write an evaluation
Each consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed. The verification is carried out by manual checking in the form of a comparison of the rating with the order history of the merchandise management system in order to make a previous product purchase a necessary condition for publication.
Die Datenschutzbestimmungen habe ich zur Kenntnis genommen.

The fields marked with * are required.

Kabelfühler verjüngt mit PVC-Leitung - Vorderansicht Cable probe tapered with PVC cable
€30.76 *
Order number: 803551-1011
Add to shopping cart
Kabelfühler verjüngt mit Silikon-Leitung - Vorderansicht Cable probe tapered with silicone cable
€33.14 *
Order number: 803561-1011
Add to shopping cart
Kabelfühler mit PFA-Leitung Vorderansicht Cable probe with PFA cable
€13.41 *
Order number: 803570-1011
Add to shopping cart