In-head transmitter for thermocouples APAQ-C130

The APAQ C130 TC for thermocouples is a head transmitter for installation in resistance thermometers with connection heads in DIN B or larger. The sophisticated product design leaves sufficient space for mounting. It is optimally designed for use in plant and machine construction and is characterized by high accuracy, reliability, long-term stability and its robust product design. The transmitter is extremely insensitive to external influences such as vibration and EMC interference. Installation and commissioning are particularly user-friendly. For example, parameterization can be carried out wirelessly, conveniently and easily via the cell phone app using NFC technology. The monitoring functions such as sensor break monitoring, sensor short-circuit and measuring range monitoring can also be activated via this.

Here you can find our downloads for In-head transmitter for thermocouples APAQ-C130

	Data sheet In-head transmitter for thermocouples APAQ-C130
	Instruction manual In-head transmitter for thermocouples APAQ-C130
	Declaration of Conformity In-head transmitter for thermocouples APAQ-C130

In-head transmitter - Special features
Inputs and outputs					Input: thermocouples Output: 4 to 20mA, temperature linear output signal
Accuracy & Long-term stability					Accuracy: depending on thermocouple Long-term stability: max drift of ±0.05°C or ±0.05% of span |year
Design					Robust - vibration and shock resistant design Compact - housing only 10.5 mm high Suitable for DIN B or larger connection heads Large center hole for easy mounting
Parametrization					Configuration - wireless via NFC technology Free app for Iphone, Android & Huawei Parameterization templates for fast mass configuration Simple configuration with "copy and paste" in no time at all
Alarm function					configurable via app Sensor break monitoring Sensor short circuit Measuring range monitoring
In-head transmitter - Input Thermocouple
Measuring element		Material / Raw Material			Norm		Maximum configurable measuring range				Min. Span			Accuracy
Type B		Pt30Rh-Pt6Rh			IEC 60584		0 °C to +1820 °C 32 °F to +3308 °F				+700 °C | +1292 °F			+100 °C to +400 °C: ±10 °C >400 °C: ±2 °C / 0,2% 1}
Type E		NiCr-CuNi			IEC 60584		-270 °C to +1000 °C -454 °F to +1832 °F				+50 °C | +122 °F			±1 °C| ±0,2 % 1}
Type J		Fe-CuNi			IEC 60584		-210 °C to +1200 °C -346 °F to +2192 °F				+50 °C | +122 °F			±1 °C| ±0,2 % 1}
Type K		NiCr-Ni			IEC 60584		-270 °C to +1300 °C -454 °F to +2372 °F				+50 °C | +122 °F			±1 °C| ±0,2 % 1}
Type N		NiCrSi-NiSi			IEC 60584		-100 °C to +1300 °C -148 °F to +2372 °F				+100 °C | +212 °F			±1 °C| ±0,2 % 1}
Type N		NiCrSi-NiSi			IEC 60584		-270 °C to -100 °C -418 °F to +148 °F				+100 °C | +212 °F			±2 °C 1}
Type R		Pt13Rh-Pt			IEC 60584		-50 °C to +1750 °C -58 °F to +3182 °F				+300 °C | +572 °F			±2 °C| ±0,2 % 1}
Type S		Pt10Rh-Pt			IEC 60584		-50 °C to +1750 °C -58 °F to +3182 °F				+300 °C | +572 °F			±2 °C| ±0,2 % 1}
Type T		Cu-CuNi			IEC 60584		-270 °C to +400 °C -454 °F to +752 °F				+50 °C | +122 °F			±2 °C| ±0,2 % 1}
1} of span (cold junction compensation error is not included)
Input impedance					>10 MΩ
Max. wire loop resistance					5 kΩ
Cold Junction Compensation					Internal or external
In-head transmitter - General information about the input
Zero adjustment					Within measuring range
In-head transmitter - Output
Output type					analog, temperature linear for TC
Output signal (mA)					4 to 20
Parametrization / Scaling					Configurable via NFC
Load					818 Ω at 24 VDC
Connection type					2-wire
In-head transmitter - Time response
Closing time / Update time (Inor)					~150 - 300
Heating period					After approx. 20 min. the typical accuracy is reached
Signal attenuation / Ajustable output filtering (Inor)					0,4 to 26 adjustable via App
Measuring cycle					< 1
In-head transmitter - Sensor monitoring & sensor error
Sensor break / Short circuit					Upscale (≥21.0 mA) or Downscale (≤3.6 mA)
Sensor failure effects (Inor)					according to NAMUR NE43
In-head transmitter - Accuracy and stability
Temperature influence
TC Type B, E, J, K, R, S, T					see table below
TC Type N (-100...+1300 °C)					±0,01 % < 4000 Ω 2} < ±0,02 % of span per °C
TC Type N (-270...-100 °C)					±0,01 % of span per °C
Further data
Supply voltage influence					<±0.005 % of span per volt
Long-term drift					±0.05 % of span per year
In-head transmitter - Type
Dimensions					See drawing
Material | Flammability					PC/ABS + PA, V0/HB, RoHS compliant
Mounting					DIN B-head or larger, DIN rail (with mounting kit)
Connection					Single wires, max. 1,5 mm², AWG 24 to 12
Weight					25							All dimensions in mm
In-head transmitter - General data
Isolation					none
Supply Voltage (VDC)					8 to 32, polarity protected
In-head transmitter - Ambient conditions
Ambient Temperatur					Storage: -40 °C to +85 °C | -40 °F to +185 °F Operating: -40 °C to +85 °C | -40 °F to +185 °F
Humidity					0 to 98 (non-condensing)
Protection					Housing IP65 | Anschlussklemmen IP00
Vibration					according to IEC 60068-2-6, Test Fc, 10bis2000 Hz, 10 g
Shock					according to IEC-60068-2-27, test Ea
Environmental influences					according to IEC 60068-2-31:2008, Test Ec
In-head transmitter - EMC
Standard					Directive: 2014/30/EU | Harmonized standards: EN 61326-1, EN 61326-2-3
Immunity performance					ESD, radiated EMC fields, magnetic fields: Criterion A Burst, conducted RF: Criteria A Overvoltage: standard deviation 1% of span
In-head transmitter - Factory configuration (if not ordered otherwise)
Input					Pt100, 3-wire, 0 °C to 100 °C
Output (mA)					4 to 20
Sensor control					Upscale (≥21.0 mA)
In-head transmitter - Mounting
You can mount the APAQ C130 head transmitter in DIN B (or larger) connection heads or on the rail. Mounting is easy because you can easily pull out the sensor cable or the insertion tube through the large center hole Ø 7 mm. The electrical connection is made according to the wiring diagram. We offer mounting material for the installation of the transmitter as accessories. Depending on your requirements, you will find kits for head mounting and top hat rail mounting. Important: To prevent measuring errors, the connecting screws for fastening the connecting cable must be tightened firmly.
							(1) M4 screw (2) spring (3) Lock washer (4) Wires from measuring insert (5) MI cable
Mounting on the rail (1) Place the transmitter on the mounting clip. (2) Press the transmitter until it snaps firmly onto the clip (3) Now you can clip one end of the mounting clip onto the rail at an angle. (4) Then please clip the other end of the clip onto the rail as well. (5) You can detach the transmitter from the rail if you press the hook on the fastening clip with the screwdriver and lift the clip out of the rail at the same time.
In-head transmitter - Configuration | Parametrization
Before making a configuration of APAQ C130TC you need to do following: Make sure that you have a mobile device with NFC communication activated. Download the app INOR Connect to your mobile device. Required versions: iOS: iOS 13 or later and Iphone 7 or later Android: Android 4.4 or later								Configuration procedure: Launch the app by clicking on the App icon or holding your mobile device against the transmitter on the part of the device where NFC is located (only possible with Android). Click on “Read Configuration” and hold your mobile device against the transmitter as explained in the first section. In the app you can edit the following: Sensor type and number of wire circuits Measuring range Upscale or Downscale sensor control TAG-number Password settings In the configuration window you can enter and change the parameters. The selected configuration is transferred to the transmitter by clicking the "Send to transmitter" button. After the transfer is completed, the transmitter uses the new parameters.