Room transmitter with display and potentiometer 0-10 V

Our room transmitter has a 0-10 V voltage output and can be mounted using screws. The room transmitter with display and 0-10 V potentiometer has eight switchable measuring ranges, a Baldur 1 plastic housing with two-line display and is suitable for measuring the temperature in indoor areas such as offices, supermarkets and schools.

Here you can find our downloads for Room transmitter with display and potentiometer 0-10 V

	Data sheet Room transmitter with display and potentiometer 0-10 V
	Instruction manual Room transmitter with display and potentiometer 0-10 V
	Declaration of Conformity Room transmitter with display and potentiometer 0-10 V

Room transmitter - Supply and output
Output					0 - 10 V
Power consumption					< 1,0 VA / 24 V DC; < 2,2 VA / 24 V AC
Voltage supply					24 V AC / DC (± 10 %)
Connection type					3-Wire
Room transmitter - General information
Measuring range					0 °C to +50 °C
Measuring element					Pt1000 | Class B | DIN EN 60751
Potentiometer					Standard 1kΩ, max. 0,1 W (mit Drehwinkelbegrenzer)
Accuracy temperature					typically ± 0.2 K at +25 °C
Load resistance					Rl > 5 kOhm
Process connection					by screws
Room transmitter - Temperature
Measuring element temperature					Pt1000 | Class B | DIN EN 60751
Measuring range temperature					0 °C to +50 °C
Output temperature					0 - 10 V
Accuracy temperature					typically ± 0.2 K at +25 °C
Room transmitter - Ambient conditions
Ambient temperature					-30 °C to +70 °C
Permissible air humidity					< 95 % r. H., non-precipitating air
Room transmitter - Certifications / Standards
Protection class					III (according to EN 60 730)
Protection type					IP 30 according to EN 60 529
Standards					CE conformity electromagnetic compatibility according to EN 61326 according to EMC Directive 2014/ 30/ EU
Room transmitter - Technical drawing
Room transmitter - Housing
Material					Plastic
Dimensions (L/W/H) (mm)					85 x 85 x 27
Color					Pure white (similar to RAL 9010)
Electrical connection					0.14 - 1.5², via screw terminals on circuit board
Display					Two lines, lighted For display of actual temperature and self-diagnostics (overrange, underrange, probe break, probe short-circuit)
Cut-out Display (B/H) (mm)					ca. 36 x 15
Room transmitter - Important assembly instructions
					For an accurate measurement of the room temperature, it is important to consider the temperature dynamics in the room. Air circulation should only take place through the openings in the housing cover. Therefore, the transmitter should be installed away from objects or obstacles that shield air movement. Please also be sure to avoid uncontrolled air currents (draughts) by installing near doors or windows. In addition, the transmitter should not be mounted on the colder outside wall.
Wall mounting or on flush-mounted box, Ø 55 mm, bottom part with 4-hole, for mounting on vertically or horizontally installed flush-mounted boxes for cable entry at the rear, with predetermined breaking point for cable entry at the top/bottom for surface-mounted units.
Room transmitter - Delivery
Delivery					Transmitter, Operating instructions
Packing					individually packed in cardboard box