Thermocouple type J M6 with silicone cable

Thermoelement Typ J M6 mit Silikon-Leitung Vorderansicht

Thermoelement Typ J M6 mit Silikon-Leitung Technische Zeichnung

Preview: Thermoelement Typ J M6 mit Silikon-Leitung Vorderansicht

Preview: Thermoelement Typ J M6 mit Silikon-Leitung Technische Zeichnung

14,67 € *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to BE, AT, NL (GER -1 workdays)

Please note that due to company holidays in part of our production from 03 Aug to 17 Aug, delivery times for some items may be longer.
If you have any questions regarding delivery times, please contact webshop@testo-sensor.de.
Thank you for your understanding.

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

E - Material connection cable

F - Length connection cable

G - Connector

H - Bend protection

Image Changer

2.Calibration

We can offer you calibration on request.
Further information on calibration can be found here.

Calibration

ISO-Calibration

DAkkS-Calibration

3-Point measurement (-20 °C, 0 °C, 60 °C)

3.How many probes do you need?

Quantity

Price calculation

Basic price

14,67 €

E - Material connection cable:
F - Length connection cable:
G - Connector:
H - Bend protection:
Calibration:
ISO-Calibration:
DAkkS-Calibration:
Quantity:

Order number: 803161-2111

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B wholesale customers welcome: All information here
Swiss customers welcome: All information here

Questions about the article?
Our staff will be happy to help you
Pius Schneider
tel:+4976539659771
mailto:pschneider@testo-sensor.de

Screw-in thermocouples with silicone cable measure the temperature in pipes or vessels and can...more

Close menu

Product information "Thermocouple type J M6 with silicone cable"

Screw-in thermocouples with silicone cable measure the temperature in pipes or vessels and can be used from -50 °C to +180 °C. Silicone seals well and remains flexible even at temperatures below freezing.

Here you can find our downloads for the Thermocouple type J M6 with silicone cable

	Data sheet Thermocouple type J M6 with silicone cable
	Instruction manual Thermocouple type J M6 with silicone cable
	Operating instruction Thermocouple Type J M6 with silicone cable
	Declaration of Conformity Thermocouple type J M6 with silicone cable

Thermocouple M6 - General Information
Measuring range		-40 °C to +180 °C
Perm. °C range cable		-50 °C to +180 °C
Accuracy		-40 °C to +375 °C: ±1,5 °C according to DIN IEC 60584 Class 1
Response time		t63 / t99: information is available on request
Pull-out force		≥ 30 N

Thermocouple M6 - Supply and output
Measuring element		Thermocouple Type J
Measuring point		Measuring point isolated
Measurement signal		Thermovoltage

Thermocouple M6 - Ambient conditions
Protection class		IP65 according DIN 60529 (depending on cable)
Humidity and moisture condensation resistance		according to application-specific qualification

Thermocouple M6 - Certificates and Standards
Standards		DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive		RoHS 2011/65/EU \| 2014/30/EU
Certificates		Certificate of suitability (on request)

Thermocouple M6 - Technical Drawing

					E - Material connection cable
					F - Length connection cable

					H - Bend protection
					G - Connector

					All dimensions in mm

Thermocouple M6 - Screw-in thread
Thread
Material thread		Stainless steel 1.4301 \| SUS 304
Length (mm)		9
Thread		M6
Wrench size		10
Protection sleeve
Material		Stainless steel 1.4301 \| SUS 304
Diameter (mm)^1}		4,5
Mounting length (mm)		17
^1} Tolerance ± 0,1 mm

Thermocouple M6 - Thermocouple cable
	Type	Color	Material (Outside / Inside)	Perm. range °C	Ø Outside (mm)	Cross section (mm²)	Color strand	Ω / m
	Thermocouple cable	Type J^1}	FEP / Silicone	-50 to +180	3,6 ± 0,2	0,22	bk, wt	2,50^2}
Length (m)		1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC \| ^1}Color according to IEC 584 \| ^2}per thermocouple \| Cable available as accessory

Thermocouple M6 - Connector
		Insulated end ferrules (50 mm)
		Mini-TC connector Type J bk
		TC connector Type J bk

Thermocouple M6 - Delivery
Assembly instructions		per process connection
Delivery and Packaging		Probe, seperatly packaged in PE bag
Matching accessories		Heat-conducting paste

Thermocouple M6 - Important assembly advices
		Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
		Please lay the cable in such a way that no water can penetrate the probe and with reserve loop (4). This allows you to extend the probe without disconnecting the electrical connection.

Qualification measurement series to ensure the function of our temperature probes over their service life
	Robust even with temperature changes	Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more.
	Resistant to heat and humidity	Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.
	Long-term stable in any weather	Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.
	Robust even under high vibration load	Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g).
	Reliable in practice: high pull-out force	The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures.
	Efficient through short response time	Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.
	Corrosion-resistant even in salt spray	Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.
Applicable for this probe type

Properties

Thermocouple:	Type J Class 1
Kalibrierung:	DAkkS-Kalibrierung, ISO-Kalibrierung
Temperature range:	-40 °C to +180 °C
Material cable:	Silicone
Process connection:	M6
industry:	Automotive, Cement and building materials industry, Glass industry, Heating technology, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry, Waste recycling/incineration

Related links to "Thermocouple type J M6 with silicone cable"

Available downloads:

Information about the manufacturer

Testo Sensor GmbH
Testo-Str. 1
D-79853 Lenzkirch
E-Mail: info@testo-sensor.de

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Thermocouple type J M6 with silicone cable"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.