Thermocouple type J G1/4 " with glass fibre cable

Thermoelement Typ J G1/4 " mit Glasseide-Leitung Vorderansicht

Thermoelement Typ J G1/4 " mit Glasseide-Leitung Technische Zeichnung

Preview: Thermoelement Typ J G1/4 " mit Glasseide-Leitung Vorderansicht

Preview: Thermoelement Typ J G1/4 " mit Glasseide-Leitung Technische Zeichnung

€ 21,97 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

C - Mounting length

E - Material connection cable

F - Length connection cable

G - Connector

H - Bend protection

Image Changer

2.Calibration

We can offer you calibration on request.
Further information on calibration can be found here.

Calibration

ISO-Calibration

3-Point measurement (0 °C, 150 °C, 300 °C)

DAkkS-Calibration

3-Point measurement (-20 °C, 0 °C, 60 °C)

3-Point measurement (0 °C, 100 °C, 200 °C)

3.How many probes do you need?

Quantity

Price calculation

Basic price

€ 21,97

C - Mounting length:
E - Material connection cable:
F - Length connection cable:
G - Connector:
H - Bend protection:
Calibration:
ISO-Calibration:
DAkkS-Calibration:
Quantity:

Order number: 803180-4111

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

Screw-in thermocouples with glass fibre cables are shielded and measure the temperature in...more

Close menu

Product information "Thermocouple type J G1/4 " with glass fibre cable"

Screw-in thermocouples with glass fibre cables are shielded and measure the temperature in pipelines or vessels up to +400 °C. They are crimped and also have a poorer seal than other cables due to the insulation material used.

Here you can find our downloads for the Thermocouple type J G1/4 " with glass fibre cable

	Data sheet Thermocouple type J G1/4 " with glass fibre cable
	Instruction manual Thermocouple type J G1/4 " with glass fibre cable
	Operating instruction Thermocouple Type J G1/4 " with glass fibre cable
	Declaration of Conformity Thermocouple type J G1/4 " with glass fibre cable

Thermocouple G1/4 " - General Information
Measuring range			-40 °C to +400 °C
Perm. °C range cable			-50 °C to +400 °C
Accuracy			-40 °C to +375 °C: ±1,5 °C \| 375 °C to 750 °C: ±0,004 \|t\| according to DIN IEC 60584 Class 1
Response time			t63 / t99: information is available on request
Pull-out force			≥ 30 N

Thermocouple G1/4 " - Supply and output
Measuring element			Thermocouple Type J
Measuring point			Measuring point isolated
Measurement signal			Thermovoltage

Thermocouple G1/4 " - Ambient conditions
Protection class			IP20 according DIN 60529 (depending on cable)
Humidity and moisture condensation resistance			according to application-specific qualification

Thermocouple G1/4 " - Certificates and Standards
Standards			DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive			RoHS 2011/65/EU \| 2014/30/EU
Certificates			Certificate of suitability (on request)

Thermocouple G1/4 " - Technical Drawing

						C - Mounting length
						E - Material connection cable

						F - Length connection cable
						H - Bend protection

						G - Connector
						All dimensions in mm

Thermocouple G1/4 " - Screw-in thread
Thread
Material thread			Stainless steel 1.4301 \| SUS 304
Length (mm)			12
Thread			G1/4 "
Wrench size			19
Protection sleeve
Material			Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}			6
Mounting length (mm)^2}			50, 100, 150, 200, 250, 300, 400, 500
^1} Tolerance ± 0,1 mm \| ^2} Tolerance ± 1%

Thermocouple G1/4 " - Thermocouple cable
	Type		Color	Material (Outside / Inside)	Perm. range °C	Ø Outside (mm)	Cross section (mm²)	Color strand	Ω / m
	Thermocouple cable		Type J^1}	Glass fibre / Varnish	-50 to +400	3,0 ± 0,2	0,22	bk, wt	2,50^2}
Length (m)			1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC \| ^1}Color according to IEC 584 \| ^2}per thermocouple \| Cable available as accessory

Thermocouple G1/4 " - Connector
			Insulated end ferrules (50 mm)
			Mini-TC connector Type J bk
			TC connector Type J bk

Thermocouple G1/4 " - Bend protection
		Version	Without (Standard), Metal bend protection
		Length (mm)	50
		Material	Stainless steel spring 1.4310 \| SUS 302

Thermocouple G1/4 " - Delivery
Assembly instructions			per process connection
Delivery and Packaging			Probe, seperatly packaged in PE bag
Matching accessories			Heat-conducting paste

Thermocouple G1/4 " - Important assembly advices
			Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
			Installation by using an immersion sleeve (4): Please ensure that the Ø and length of the immersion sleeve are selected to suit the installation situation so that the minimum immersion depth can be achieved. Please also pay attention to the correct process connection. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times.
			Please lay the cable in such a way that no water can penetrate the probe and with reserve loop (4). This allows you to extend the probe without disconnecting the electrical connection.

Qualification measurement series to ensure the function of our temperature probes over their service life
	Robust even with temperature changes		Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more.
	Resistant to heat and humidity		Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.
	Long-term stable in any weather		Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.
	Robust even under high vibration load		Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g).
	Reliable in practice: high pull-out force		The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures.
	Efficient through short response time		Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.
	Corrosion-resistant even in salt spray		Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.
Applicable for this probe type

Properties

Thermocouple:	Type J Class 1
Temperature range:	-40 °C to +400 °C
Material cable:	Glass fibre
Process connection:	G1/4 "
industry:	Automotive, Cement and building materials industry, Glass industry, Heating technology, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry, Waste recycling/incineration

Related links to "Thermocouple type J G1/4 " with glass fibre cable"

Available downloads:

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Thermocouple type J G1/4 " with glass fibre cable"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.