Delivery outside GER for business customers only
Quality directly from the manufacturer
Langzeitstabile Temperaturfühler über Jahre
Advice directly from experts

Thermocouple type K M4 with PVC cable

€ 14,46 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.
1.Configure and order now
E - Material connection cable

Bitte stellen Sie sicher, dass die technischen Daten der Anschlussleitung, insbesondere hinsichtlich Temperatur und IP-Schutzklasse, zu Ihrer Applikation passen. Detailierte Informationen finden Sie in unseren Datenblättern.
Temperaturbereiche unserer Leitungen:
PVC -30 °C bis +105 °C

(E8020) PVC/PVC (2 x 0,22 mm²)
F - Length connection cable
keine Auswahl
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
G - Connector

Bitte beachten Sie den spezifizierten Temperaturbereich des Stecker / der Aderendenhülsen
isolierte Aderendhülsen: bis 80 °C
Mini-TE-Stecker: bis 220 °C
TE-Stecker: bis 220 °C

(G01) Insulated end ferrules
(G12) Mini-TC connector K gn
(G19) Mini-TC connector K ye
(G32) TC connector K gn
(G39) TC connector K ye
H - Bend protection
(H0) Without (Standard)
Image Changer
2.How many probes do you need?
Price calculation
Basic price
€ 14,46
E - Material connection cable:  
F - Length connection cable:  
G - Connector:  
H - Bend protection:  
Configuration is incomplete - please check it!
  • 803151-1211
Our Payments


Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
Screw-in thermocouples with PVC cable are the most cost-efficient solution to measure the...more
Product information "Thermocouple type K M4 with PVC cable"

Screw-in thermocouples with PVC cable are the most cost-efficient solution to measure the temperature in pipes or vessels. PVC cables can be used up to +105 °C.

Here you can find our downloads for the Thermocouple type K M4 with PVC cable

pdf-download Data sheet Thermocouple type K M4 with PVC cable
pdf-download Instruction manual Thermocouple type K M4 with PVC cable
pdf-download Operating instruction Thermocouple Type K M4 with PVC cable
pdf-download Declaration of Conformity Thermocouple type K M4 with PVC cable

Thermocouple M4 - General Information

Measuring range -30 °C to +105 °C
Perm. °C range cable -30 °C to +105 °C
Accuracy -40 °C to +375 °C: ±1,5 °C according to DIN IEC 60584 Class 1
Response time t63 / t99: information is available on request
Pull-out force ≥ 30 N

Thermocouple M4 - Supply and output

Measuring element Thermocouple Type K
Measuring point Measuring point isolated
Measurement signal Thermovoltage

Thermocouple M4 - Ambient conditions

Protection class IP54 according DIN 60529 (depending on cable)
Humidity and moisture condensation resistance according to application-specific qualification

Thermocouple M4 - Certificates and Standards

Standards DIN EN 61326-1:2013 | DIN EN IEC 63000:2019-05
Directive RoHS 2011/65/EU | 2014/30/EU
Certificates Certificate of suitability (on request)

Thermocouple M4 - Technical Drawing

E - Material connection cable
F - Length connection cable
H - Bend protection
G - Connector
All dimensions in mm

Thermocouple M4 - Screw-in thread

Material thread Stainless steel 1.4301 | SUS 304
Length (mm) 9
Thread M4
Wrench size 8
Protection sleeve
Material Stainless steel 1.4301 | SUS 304
Diameter (mm)1} 3
Mounting length (mm) 17
1} Tolerance ± 0,1 mm

Thermocouple M4 - Thermocouple cable

Type Color Material (Outside / Inside) Perm. range °C Ø Outside (mm) Cross section (mm²) Color strand Ω / m
Thermocouple cable Type K1} PVC / PVC -30 to +105 3,8 ± 0,2 0,22  gn, wt 4,502}
Length (m) 1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC | 1}Color according to IEC 584 | 2}per thermocouple | Cable available as accessory

Thermocouple M4 - Connector

Insulated end ferrules (50 mm)
Mini-TC connector Type K gn
Mini-TC connector Type K ye
TC connector Type K gn
TC connector Type K ye

Thermocouple M4 - Delivery

Assembly instructions per process connection
Delivery and Packaging Probe, seperatly packaged in PE bag
Matching accessories Heat-conducting paste

Thermocouple M4 - Important assembly advices

Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached

Please lay the cable in such a way that no water can penetrate the probe and with reserve loop (4). This allows you to extend the probe without disconnecting the electrical connection.


Qualification measurement series to ensure the function of our temperature probes over their service life

Qualifizierungsmessreihe Robust even with temperature changes Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more. Checkmark
Qualifizierungsmessreihe Resistant to heat and humidity Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.        
Qualifizierungsmessreihe Long-term stable in any weather Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.        
Qualifizierungsmessreihe Robust even under high vibration load Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g). Checkmark
Qualifizierungsmessreihe Reliable in practice: high pull-out force The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures. Checkmark
Qualifizierungsmessreihe Efficient through short response time Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.        
Qualifizierungsmessreihe Corrosion-resistant even in salt spray Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years. Checkmark

Applicable for this probe type

Thermocouple: Type K Class 1
Temperature range: -30 °C to +105 °C
Material cable: PVC
Process connection: M4
industry: Automotive, Cement and building materials industry, Glass industry, Heating technology, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry, Waste recycling/incineration
Related links to "Thermocouple type K M4 with PVC cable"
Available downloads:
Read, write and discuss reviews...more
Customer evaluation for "Thermocouple type K M4 with PVC cable"
Write an evaluation
Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.
Please enter these characters in the following text field.
I have taken note of the Privacy Policy.

The fields marked with * are required.

Einschraubfühler M4 mit PVC-Leitung Vorderansicht Screw-in probe M4 with PVC cable
€ 12,61 *
Order number: 803151-1011
Add to shopping cart
Thermoelement Typ K G1/2 " mit PVC-Leitung Vorderansicht Thermocouple type K G1/2 " with PVC cable
€ 17,32 *
Order number: 803150-1211
Add to shopping cart
Thermoelement Typ J M4 mit PVC-Leitung Vorderansicht Thermocouple type J M4 with PVC cable
€ 14,46 *
Order number: 803151-1111
Add to shopping cart
Thermoelement Typ K M4 mit Silikon-Leitung Vorderansicht Thermocouple type K M4 with silicone cable
€ 15,86 *
Order number: 803161-1211
Add to shopping cart
Thermoelement Typ K M4 mit PFA-Leitung Vorderansicht Thermocouple type K M4 with PFA cable
€ 19,01 *
Order number: 803171-1211
Add to shopping cart
Thermoelement Typ K M4 mit Glasseide-Leitung Vorderansicht Thermocouple type K M4 with glass fibre cable
€ 19,71 *
Order number: 803181-1211
Add to shopping cart
Thermoelement Typ K M6 mit PVC-Leitung Vorderansicht Thermocouple type K M6 with PVC cable
€ 13,27 *
Order number: 803151-2211
Add to shopping cart
Thermoelement Typ K M8 mit PVC-Leitung Vorderansicht Thermocouple type K M8 with PVC cable
€ 13,63 *
Order number: 803151-3211
Add to shopping cart