Brass immersion sleeve R1/2 "
Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)
Delivery time 4 Workdays to BE, AT, NL (GER -1 workdays)
| Monting length: | ||
| Quantity: |
- Order number: 809520-1000
Advantages
- We are ready to deliver: All information here
- Advice directly from experts
- Quality directly from the manufacturer
- Long-term stable temperature probes over years
- B2B customers welcome: All information here
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
Our brass immersion sleeve R1/2 " is the most cost-efficient variant for use in service water and suitable for all immersion and cable probes. The probe is clamped in and fixed by means of the locking screw. We recommend the use of thermal paste.
 | Brass immersion sleeve R1/2 " Data sheet |
Brass immersion sleeve R1/2 " - General Information | |||||||||||||||||||
| Mounting length (mm) | 50, 100, 150, 200, 250, 300, 400 | ||||||||||||||||||
| Temp. Max | +150 °C | ||||||||||||||||||
| Pressure proof up to | 10 bar | ||||||||||||||||||
| Material | Nickel plated | ||||||||||||||||||
| Process connection | R1/2 " | ||||||||||||||||||
| Wrench size | 22 | ||||||||||||||||||
| Diameter inner (mm) | 6,5 | ||||||||||||||||||
| Diameter outside (mm) | 8 | ||||||||||||||||||
| Scope of delivery | Brass immersion sleeve R1/2 ", packed in PE bag | ||||||||||||||||||
Brass immersion sleeve R1/2 " - Assembly advices | |||||||||||||||||||
 | |||||||||||||||||||
| Mounting by using an immersion sleeve: Please note that the Ø and the length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times. | |||||||||||||||||||
Brass immersion sleeve R1/2 " - Technical Drawing | |||||||||||||||||||
 | |||||||||||||||||||
