Immersion sleeve G1/2 " with internal thread
Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)
Delivery time 4 Workdays to BE, AT, NL (GER -1 workdays)
| Diameter: | ||
| Mounting Length: | ||
| Quantity: |
- Order number: 809520-3000
Advantages
- We are ready to deliver: All information here
- Advice directly from experts
- Quality directly from the manufacturer
- Long-term stable temperature probes over years
- B2B customers welcome: All information here
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
Our immersion sleeve G1/2 " with internal thread is suitable for use in aggressive media and in drinking water. It is specially designed for Screw-in probes with a G1/2 " process connection. The mounting length and diameter of the immersion sleeve can also be selected to match the mounting length and diameter of the Screw-in probe. We recommend the use of heat conductive paste.
 | Immersion sleeve G1/2 " with internal thread Data sheet |
Immersion sleeve G1/2 " with internal thread - General Information | |||||||||||||||||||
| Diameter (mm) | 9, 10, 11, 12 | ||||||||||||||||||
| Mounting length (mm) | 30, 80, 130, 180, 230, 280, 380 | ||||||||||||||||||
| Temp. Max | +600 °C | ||||||||||||||||||
| Pressure proof up to | 40 bar | ||||||||||||||||||
| Material | Stainless steel 1.4571 | 316TI | ||||||||||||||||||
| Process connection | G 1/2 " | ||||||||||||||||||
| Screw-in thread | G 1/2 " | ||||||||||||||||||
| Wrench size | 27 | ||||||||||||||||||
| Scope of delivery | Immersion sleeve G1/2 " with internal thread, packed in PE bag | ||||||||||||||||||
Immersion sleeve G1/2 " with internal thread - Assembly advices | |||||||||||||||||||
 | |||||||||||||||||||
| Mounting by using an immersion sleeve: Please note that the Ø and the length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times. | |||||||||||||||||||
Immersion sleeve G1/2 " with internal thread - Technical Drawing | |||||||||||||||||||
 | |||||||||||||||||||
