Cross-band probe with ring magnet

Kreuzbandfühler mit Ringmagnet Vorderansicht

Kreuzbandfühler mit Ringmagnet Technische Zeichnung

Preview: Kreuzbandfühler mit Ringmagnet Vorderansicht

Preview: Kreuzbandfühler mit Ringmagnet Technische Zeichnung

139,60 € *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to BE, AT, NL (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

E - Material connection cable

F - Length connection cable

G - Connector

2.Calibration

We can offer you calibration on request.
Further information on calibration can be found here.

Calibration

ISO-Calibration

3-Point measurement (60 °C, 120 °C, 180 °C)

3.How many probes do you need?

Quantity

Price calculation

Basic price

139,60 €

E - Material connection cable:
F - Length connection cable:
G - Connector:
Calibration:
ISO-Calibration:
Quantity:

Order number: 802912-1211

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B wholesale customers welcome: All information here
Swiss customers welcome: All information here

Questions about the article?
Our staff will be happy to help you
Pius Schneider
tel:+4976539659771
mailto:pschneider@testo-sensor.de

All our cross band probes are ideal for contact temperature measurement on surfaces. Their type...more

Close menu

Product information "Cross-band probe with ring magnet"

All our cross band probes are ideal for contact temperature measurement on surfaces. Their type is developed for the fastest surface temperature measurements and ensures the shortest response times due to the filigree head design. The type with the strong ring magnet allows you to connect the probe flexibly, safely and quickly to different measuring points. The ergonomic handle serves as heat protection and includes an integrated bend protection.

Here you can find our downloads for the Cross-band probe with ring magnet

	Data sheet Cross-band probe with ring magnet
	Instruction manual Cross-band probe with ring magnet
	Operating instruction Cross-band probe with ring magnet
	Declaration of Conformity Cross-band probe with ring magnet

Surface thermocouple - General Information
Measuring range		-40 °C to +180 °C - The measuring range depends on The cable and contact body.
Perm. °C range cable		see cable
Accuracy		-40 °C to +333 °C: ±2,5 °C according to DIN IEC 60584 Class 2
Response time		t63: < 0,8 s t99: < 3 s
Pull-out force		≥ 30 N

Surface thermocouple - Supply and output
Measuring element		Thermocouple Type K
Measuring point		Measuring point not isolated
Measurement signal		Thermovoltage

Surface thermocouple - Ambient conditions
Protection class		none (open measuring head)
Humidity and moisture condensation resistance		according to application-specific qualification

Surface thermocouple - Certificates and Standards
Standards		DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive		RoHS 2011/65/EU \| 2014/30/EU
Certificates		Certificate of suitability (on request)

Surface thermocouple - Technical Drawing

					E - Material connection cable
					F - Length connection cable

					G - Connector

					All dimensions in mm
X, Y, Z not configurable \| X: PTFE \|Y: aluminum \|Z: ring magnet

Surface thermocouple - Probe head
Contact geometry		Cross band (fitting)
Material		Aluminium
Length (mm)		37 (with bend protection 53)
Perm. °C range		+ 180 °C
Diameter (mm)		20
Holding magnet strength		Counter material adhesion ≥10 N

Surface thermocouple - Handle
Material		PTFE

Surface thermocouple - Thermocouple cable
	Type	Color	Material (Outside / Inside)	Perm. range °C	Ø Outside (mm)	Cross section (mm²)	Color strand	Ω / m
	Thermocouple cable	Type K^1}	PVC / PVC	-30 to +105	3,8 ± 0,2	0,22	gn, wt	4,50^2}
	Thermocouple cable	Type K^1}	FEP / Silicone	-50 to +180	3,6 ± 0,2	0,22	gn, wt	4,50^2}
	Thermocouple compensating cable	Type K^1}	FEP / FEP	-50 to +205	4,0 ± 0,2	0,22	gn, wt	4,50^2}
Length (m)		1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC \| ^1}Color according to IEC 584 \| ^2}per thermocouple \| Cable available as accessory

Surface thermocouple - Connector
		Insulated end ferrules (50 mm)
		Mini-TC connector Type K gn
		TC connector Type K gn

Surface thermocouple - Delivery
Delivery and Packaging		Probe, seperatly packaged in PE bag
Matching accessories		Cable

Surface thermocouple - Important assembly advices
		Our cross band probes measure the surface temperature. At the measuring point, the surface should be clean, flat and free of residues. If necessary, you can use thermal paste for better thermal coupling. Our probes are best suited for measurement on flat surfaces (1). For uneven or round surfaces, please make sure that the contact area is sufficiently large (2). If the measuring surface is too small (3), measurement errors may occur.
		The filigree cross tapes are sensitive to mechanical damage. Therefore, please do not press the measuring tapes in with your fingers or with a pointed object. Carefully place the cross band probes on the measuring point and press them lightly.
		Please lay the cable with reserve loop. In this way, you can extend the probe without disconnecting the electrical connection.
		The contact probe is attached directly to the measuring point with the contact probe bar magnet. Please pay attention to the fact that the handle could be hot when you want to release the probe.

Qualification measurement series to ensure the function of our temperature probes over their service life
	Robust even with temperature changes	Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more.
	Resistant to heat and humidity	Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.
	Long-term stable in any weather	Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.
	Robust even under high vibration load	Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g).
	Reliable in practice: high pull-out force	The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures.
	Efficient through short response time	Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.
	Corrosion-resistant even in salt spray	Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.
Applicable for this probe type

Properties

Thermocouple:	Type K Class 2
Temperature range:	-40 °C to +180 °C
Material cable:	FEP, PVC, Silicone
industry:	Automotive, Cement and building materials industry, Glass industry, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry, Waste recycling/incineration

Related links to "Cross-band probe with ring magnet"

Available downloads:

Information about the manufacturer

Testo Sensor GmbH
Testo-Str. 1
D-79853 Lenzkirch
E-Mail: info@testo-sensor.de

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Cross-band probe with ring magnet"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.