Delivery outside GER for business customers only
Quality directly from the manufacturer
Langzeitstabile Temperaturfühler über Jahre
Advice directly from experts
 

Cable probe fast response with silicone cable

€ 27,85 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.
1.Configure and order now
A - Measuring element
keine Auswahl
(A011) Pt100 Class A
(A012) Pt100 Class B
(A013) Pt100 1/3 Class B
(A014) Pt100 1/10 Class B
(A022) Pt500 Class B
(A031) Pt1000 Class A
(A032) Pt1000 Class B
(A106) NTC 5 kOhm
B - Connection Type
(B2) 2-Wire
(B3) 3-Wire
(B4) 4-Wire
E - Material connection cable
(E2200) SIL/SIL (2 x 0,22 mm²)
(E2201) SIL/SIL (3 x 0,22 mm²)
(E2202) SIL/SIL (4 x 0,22 mm²)
F - Length connection cable
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
G - Connector
(G01) Insulated end ferrules
(G01) Insulated end ferrules
(G01) Insulated end ferrules
H - Bend protection
(H0) Without (Standard)
(H1) Metal bend protection
2.How many probes do you need?
Price calculation
Basic price
€ 27,85
A - Measuring element:  
B - Connection Type:  
E - Material connection cable:  
F - Length connection cable:  
G - Connector:  
H - Bend protection:  
Quantity:  
Configuration is incomplete - please check it!
  • 803561-1011-1
Our Payments
MasterCardPayPalInvoiceVISAPrepayment

Advantages

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
The fast response cable probe uses a protection sleeve that tapers from a diameter of 6 mm to a...more
Product information "Cable probe fast response with silicone cable"

The fast response cable probe uses a protection sleeve that tapers from a diameter of 6 mm to a diameter of 3 mm. This allows it to be used at smaller measuring points, achieves a fast response time and is waterproof. (IP67)

Here you can find our downloads for the Cable probe fast response with silicone cable

pdf-download Data sheet Cable probe fast response with silicone cable
pdf-download Instruction manual Cable probe fast response with silicone cable
pdf-download Operating instruction Cable probe fast response with silicone cable
pdf-download Declaration of Conformity Cable probe fast response with silicone cable
 

Cable probe - General Information

Measuring range -50 °C to +180 °C depending on sensor Type and connection cable
Perm. °C range cable -50 °C to +180 °C
Accuracy depending on sensor Type
Response time t50: ≤ 1 s | t63: ≤ 1,5 s | t90: ≤ 2 s *
Pull-out force ≥ 30 N
* Medium1: Air (25 °C) | Medium2: Water (60°C) | Flow velocity: 0.2 m/s | Measuring element: Pt100 | More information about response time measurement here
                                       

Cable probe - Supply and output

Max. measurement current max. 1 mA
Supply voltage approx. 5 V depending on measurement current
Measurement signal passive (resistance value)
 

Cable probe - Ambient conditions

Protection class IP67 according DIN 60529
Humidity and moisture condensation resistance according to application-specific qualification
 

Cable probe - Certificates and Standards

Standards DIN EN 61326-1:2013 | DIN EN IEC 63000:2019-05
Directive RoHS 2011/65/EU | 2014/30/EU
 

Cable probe - Technical Drawing

A - Measuring element
B - Connection Type
E - Material connection cable
F - Length connection cable
H - Bend protection
G - Connector
All dimensions in mm
 

Cable probe - Measuring element

Measuring element Perm. range °C Accuracy / Tolerance resistance
Pt100 -50 °C to +400 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt100 -50 °C to +300 °C Class A dT = ±(0,15 °C + 0,002|t|)1}
Pt100 -50 °C to +200 °C 1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005|t|))1}
Pt100 ±0 °C to +100 °C 1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005|t|))1}
Pt500 -70 °C to +500 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt1000 -50 °C to +400 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt1000 -50 °C to +300 °C Class A dT = ±(0,15 °C + 0,002|t|)1}
NTC 5 kOhm -40 °C to +150 °C R25 = 5 KOhm ±1 %
1} according to IEC 751 / EN 60751 | Please note that the measuring range depends on the measuring element and the connection cable.
 

Cable probe - Possible connections

Measuring element 2W 3W 4W
NTC Checkmark    
Pt Checkmark Checkmark Checkmark
 

Cable probe - Protection sleeve

Material Stainless steel 1.4404 | 316L
Diameter (mm)1} 3 / 6
Length (mm) 55,0 / 74
1} Tolerance ± 0,1 mm
 

Cable probe - Material connection cable

Color: red-brown, Perm. range °C: -50 to +180
Material (Outside / Inside) Ø Outside (mm) Cross section (mm²)2} Color strand Ω / m1}
Silicone / Silicone 4,7 ± 0,2 2 x 0,22 rd, wt 0,08
Silicone / Silicone 4,9 ± 0,2 3 x 0,22 rd, wt, rd 0,08
Silicone / Silicone 4,9 ± 0,2 4 x 0,22 rd, wt, rd, wt 0,08
Length (m) 1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm a min. 100 VDC | Cable available as accessory | 1} per single strand | 2} Tolerance ± 0,03 mm²
 

Cable probe - Connector

Insulated end ferrules (50 mm)
 

Cable probe - Bend protection

Version Without (Standard), Metal bend protection
Length (mm) 50
Material Stainless steel spring 1.4310 | SUS 302
 

Cable probe - Delivery

Assembly instructions by using compression fitting or immersion sleeve
Delivery and Packaging Probe, seperatly packaged in PE bag
Matching accessories Immersion sleeve, Heat-conducting paste, Compression fitting, Quick-release strap
 

Cable probe - Important assembly advices

Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached

Installation by means of compression fitting: Please tighten the union nut of the compression fitting by hand as far as it will go (clearly noticeable). For compression fittings with PTFE pressure ring, please make a 1/4 turn with a wrench suitable for the width across flats. These compression fittings can be used several times in this way. In the case of compression fittings with stainless steel cutting ring, the compression fitting connects to the protection tube. This connection is pressure resistant up to 40 bar. However, the compression fitting can only be used once. It must also be tightened more firmly. Please tighten it with 1 3/4 turns.

Mounting by using an immersion sleeve (4): Please note that the Ø and the length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times.

Please lay the cable with reserve loop (4) and in such a way that no water can penetrate the sensor head. This allows you to extend the probe without disconnecting the electrical connection.

Properties
Measuring element: NTC 5 kOhm, Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range: -50 °C to +180 °C
Connection type: 2-Wire, 3-Wire, 4-Wire
Material cable: Silicone
industry: Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Refrigeration, White goods
Related links to "Cable probe fast response with silicone cable"
Available downloads:
Read, write and discuss reviews...more
Customer evaluation for "Cable probe fast response with silicone cable"
Write an evaluation
Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.
Please enter these characters in the following text field.
I have taken note of the Privacy Policy.

The fields marked with * are required.

Kabelfühler abgesetzt mit Silikon-Leitung - Vorderansicht Cable probe stepped with silicone cable
€ 30,63 *
Order number: 803562-1011
Add to shopping cart
Kabelfühler mit Silikon-Leitung Vorderansicht Cable probe with silicone cable
€ 7,77 *
Order number: 803560-1011
Add to shopping cart
Kabelfühler schnellansprechend mit PVC-Leitung - Vorderansicht Cable probe fast response with PVC cable
€ 25,85 *
Order number: 803551-1011-1
Add to shopping cart
Kabelfühler verjüngt mit PFA-Leitung - Vorderansicht Cable probe fast response with PFA cable
€ 32,35 *
Order number: 803571-1011-1
Add to shopping cart