Cable probe waterproof with PVC cable

Kabelfühler wasserdicht mit PVC-Leitung - Vorderansicht

Kabelfühler wasserdicht mit PVC-Leitung - Technische Zeichnung

Preview: Kabelfühler wasserdicht mit PVC-Leitung - Vorderansicht

Preview: Kabelfühler wasserdicht mit PVC-Leitung - Technische Zeichnung

€ 25,85 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

A - Measuring element

B - Connection Type

E - Material connection cable

F - Length connection cable

G - Connector

H - Bend protection

2.Calibration

We can offer you calibration on request.
Further information on calibration can be found here.

Calibration

ISO-Calibration

3-Point measurement (-18 °C, 0 °C, 60 °C)

DAkkS-Calibration

3-Point measurement (-20 °C, 0 °C, 60 °C)

3.How many probes do you need?

Quantity

Price calculation

Basic price

€ 25,85

A - Measuring element:
B - Connection Type:
E - Material connection cable:
F - Length connection cable:
G - Connector:
H - Bend protection:
Calibration:
ISO-Calibration:
DAkkS-Calibration:
Quantity:

Order number: 803551-1011-2

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B wholesale customers welcome: All information here
Swiss customers welcome: All information here

Questions about the article?
Our staff will be happy to help you
Pius Schneider
tel:+4976539659771
mailto:pschneider@testo-sensor.de

The waterproof cable probe uses a protection sleeve that tapers from a diameter of 6 mm to a...more

Close menu

Product information "Cable probe waterproof with PVC cable"

The waterproof cable probe uses a protection sleeve that tapers from a diameter of 6 mm to a diameter of 3 mm. This allows it to be used at smaller measuring points, achieves a waterproof time and is waterproof. (IP67)

Here you can find our downloads for the Cable probe waterproof with PVC cable

	Data sheet Cable probe waterproof with PVC cable
	Instruction manual Cable probe waterproof with PVC cable
	Operating instruction Cable probe waterproof with PVC cable
	Declaration of Conformity Cable probe waterproof with PVC cable

Temperature probe waterproof - General Information
Measuring range				-30 °C to +105 °C depending on sensor Type and connection cable
Perm. °C range cable				-30 °C to +105 °C
Accuracy				depending on sensor Type
Response time				t50: ≤ 1 s \| t63: ≤ 1,5 s \| t90: ≤ 2 s \| t99: su richiesta *
Pull-out force				≥ 30 N
* Medium1: Air (25 °C) \| Medium2: Water (60°C) \| Flow velocity: 0.2 m/s \| Measuring element: Pt100 \| More information about response time measurement here

Temperature probe waterproof - Supply and output
Max. measurement current				max. 1 mA
Supply voltage				approx. 5 V depending on measurement current
Measurement signal				passive (resistance value)

Temperature probe waterproof - Ambient conditions
Protection class				IP67 according DIN 60529
Humidity and moisture condensation resistance				according to application-specific qualification

Temperature probe waterproof - Certificates and Standards
Standards				DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive				RoHS 2011/65/EU \| 2014/30/EU

Temperature probe waterproof - Technical Drawing

						A - Measuring element
						B - Connection Type
						E - Material connection cable

						F - Length connection cable
						H - Bend protection

						G - Connector
						All dimensions in mm

Temperature probe waterproof - Measuring element
Measuring element	Perm. range °C			Accuracy / Tolerance resistance
Pt100	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt100	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
Pt100	-50 °C to +200 °C			1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005\|t\|))^1}
Pt100	±0 °C to +100 °C			1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005\|t\|))^1}
Pt500	-70 °C to +500 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
NTC 5 kOhm	-40 °C to +150 °C			R25 = 5 KOhm ±1 %
^1} according to IEC 751 / EN 60751 \| Please note that the measuring range depends on the measuring element and the connection cable.

Temperature probe waterproof - Possible connections
Measuring element	2W	3W	4W
NTC
Pt

Temperature probe waterproof - Protection sleeve
Material				Stainless steel 1.4404 \| 316L
Diameter (mm)^1}				3 / 6
Length (mm)				55,0 / 74
^1} Tolerance ± 0,1 mm

Temperature probe waterproof - Material connection cable
Color: black, Perm. range °C: -30 to +105
	Material (Outside / Inside)			Ø Outside (mm)	Cross section (mm²)^2}	Color strand	Ω / m^1}
	PVC / PVC			4,8 ± 0,2	2 x 0,22	rd, wt	0,07
	PVC / PVC			4,8 ± 0,2	3 x 0,22	rd, wt, rd	0,07
	PVC / PVC			4,8 ± 0,2	4 x 0,22	rd, wt, rd, wt	0,07
Length (m)			1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm a min. 100 VDC \| Cable available as accessory \| ^1} per single strand \| ^2} Tolerance ± 0,03 mm²

Temperature probe waterproof - Connector
				Insulated end ferrules (50 mm)

Temperature probe waterproof - Bend protection
		Version		Without (Standard), Metal bend protection
		Length (mm)		50
		Material		Stainless steel spring 1.4310 \| SUS 302

Temperature probe waterproof - Delivery
Assembly instructions				by using compression fitting or immersion sleeve
Delivery and Packaging				Probe, seperatly packaged in PE bag
Matching accessories				Immersion sleeve, Heat-conducting paste, Compression fitting, Quick-release strap

Temperature probe waterproof - Important assembly advices
				Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
				Installation by means of compression fitting: Please tighten the union nut of the compression fitting by hand as far as it will go (clearly noticeable). For compression fittings with PTFE pressure ring, please make a 1/4 turn with a wrench suitable for the width across flats. These compression fittings can be used several times in this way. In the case of compression fittings with stainless steel cutting ring, the compression fitting connects to the protection tube. This connection is pressure resistant up to 40 bar. However, the compression fitting can only be used once. It must also be tightened more firmly. Please tighten it with 1 3/4 turns.
				Mounting by using an immersion sleeve (4): Please note that the Ø and the length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times.
				Please lay the cable with reserve loop (4) and in such a way that no water can penetrate the sensor head. This allows you to extend the probe without disconnecting the electrical connection.

Properties

Measuring element:	NTC 5 kOhm, Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range:	-30 °C to +105 °C
Connection type:	2-Wire, 3-Wire, 4-Wire
Material cable:	PVC
industry:	Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Refrigeration, White goods

Related links to "Cable probe waterproof with PVC cable"

Available downloads:

Information about the manufacturer

Testo Sensor GmbH
Testo-Str. 1
D-79853 Lenzkirch
E-Mail: info@testo-sensor.de

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Cable probe waterproof with PVC cable"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.