Screw-in probe with J-Head - HL 400 °C | Testo Sensor Netherlands

Einschraubfühler mit J-Kopf - HL 400 °C Vorderansicht

Einschraubfühler mit J-Kopf - HL 400 °C Technische Zeichnung

Preview: Einschraubfühler mit J-Kopf - HL 400 °C Vorderansicht

Preview: Einschraubfühler mit J-Kopf - HL 400 °C Technische Zeichnung

€ 72,38 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

A - Measuring element

B - Connection Type

C - Mounting length

2.Calibration

We can offer you calibration on request.
Further information on calibration can be found here.

Calibration

ISO-Calibration

3-Point measurement (-18 °C, 0 °C, 60 °C)

DAkkS-Calibration

3-Point measurement (-20 °C, 0 °C, 60 °C)

3.How many articles do you need?

Quantity

Price calculation

Basic price

€ 72,38

A - Measuring element:
B - Connection Type:
C - Mounting length:
Calibration:
ISO-Calibration:
DAkkS-Calibration:
Quantity:

Order number: 803018-4011

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

Our Screw-in probe with J-head is suitable for use up to 400 °C and is installed via the G1/2 "...more

Close menu

Product information "Screw-in probe with J-Head - HL 400 °C"

Our Screw-in probe with J-head is suitable for use up to 400 °C and is installed via the G1/2 " thread and the neck tube. The J-head with the protection sleeve and neck tube is designed according to DIN43772 Form 2G.

Here you can find our downloads for the Screw-in probe with J-Head - HL 400 °C

	Data sheet Screw-in probe with J-Head - HL 400 °C
	Instruction manual Screw-in probe with J-Head - HL 400 °C
	Operating instruction Screw-in probe with J-Head - HL 400 °C
	Declaration of Conformity Screw-in probe with J-Head - HL 400 °C

Screw-in probe with head - General Information
Measuring range				-50 °C to +400 °C depending on the sensor Type
Perm. (°C) conn. head				-40 °C to +100 °C
Accuracy				depending on sensor Type

Screw-in probe with head - Supply and output
Max. measurement current				max. 1 mA
Supply voltage				approx. 5 V depending on measurement current
Measurement signal				passive (resistance value)

Screw-in probe with head - Ambient conditions
Protection class				IP65 according DIN 60529
Humidity and moisture condensation resistance				according to application-specific qualification

Screw-in probe with head - Certificates and Standards
Standards				DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive				RoHS 2011/65/EU \| 2014/30/EU

Screw-in probe with head - Technical Drawing

					A - Measuring element
					B - Connection Type
					C - Mounting length
					All dimensions in mm

Screw-in probe with head - Measuring element
Measuring element	Perm. range °C			Accuracy / Tolerance resistance
Pt100	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt100	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
Pt100	-50 °C to +200 °C			1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005\|t\|))^1}
Pt100	±0 °C to +100 °C			1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005\|t\|))^1}
Pt1000	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
^1} according to IEC 751 / EN 60751

Screw-in probe with head - Possible connections
Measuring element	2W	3W	4W
Pt

Screw-in probe with head - Protection sleeve
Thread
Length (mm)				14
Thread				G1/2 "
Wrench size				27
Material				Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}				6
Mounting length (mm)^2}				50, 100, 150, 200, 250, 300, 400, 500
^1} Tolerance ± 0,1 mm \| ^2} Tolerance ± 1%

Screw-in probe with head - Connection head
Design				Form J (MA)
Material				Aluminium pressure die-casting
W/H/Ø (mm)				50/60/48
Color				RAL 9006 aluminium silver
Cable gland				with strain relief
Cable electricial connection				Screw terminals max. 1,5 mm²
Clamping range (mm)				5 to 9
Sensor unit				Fixed


Screw-in probe with head - neck tube
Length (mm)				60

Screw-in probe with head - Delivery
Assembly instructions				by means of process connection
Delivery and Packaging				Probe, seperatly packaged in PE bag
Matching accessories				Heat-conducting paste, Cable

Screw-in probe with head - Important assembly advices
				Measuring errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deep as possible into the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, if an immersion sleeve is used, the Ø of the immersion sleeve. When installing in pipes whose Ø does not have a sufficiently deep installation depth, you should either install the probe at an angle or in a pipe elbow. Make sure that you have enough space so that the probe can be removed again. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
				Installation by using an immersion sleeve (4): Please ensure that the Ø and length of the immersion sleeve are selected to suit the installation situation so that the minimum immersion depth can be achieved. Please also ensure that the process connection is correct. Because the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected so that the protection sleeve touches the bottom of the immersion sleeve and the air cushion around the protection tube is as small as possible. The use of thermal conduction paste can improve the response times.
				Please lay the cable so that no water can penetrate the probe and with a spare loop (4). This allows you to extend the probe without disconnecting the electrical connection.

Properties

Measuring element:	DS18B20, KTY 81-110, KTY 81-210, LM235Z, Ni1000, NTC 5 kOhm, NTC 10 kOhm, NTC 20 kOhm, Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range:	-50 °C to +400 °C
Connection type:	2-Wire, 3-Wire, 4-Wire
Process connection:	G1/2 "
Connection head:	Form J (MA)
industry:	Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Power generation, Refrigeration

Related links to "Screw-in probe with J-Head - HL 400 °C"

Available downloads:

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Screw-in probe with J-Head - HL 400 °C"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.