Thermocouple Type J with B-Head - AH

Thermoelement Typ J mit B-Kopf - AH Vorderansicht

Thermoelement Typ J mit B-Kopf - AH Technische Zeichnung

Preview: Thermoelement Typ J mit B-Kopf - AH Vorderansicht

Preview: Thermoelement Typ J mit B-Kopf - AH Technische Zeichnung

104,87 € *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to BE, AT, NL (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

C - Mounting length

2.How many articles do you need?

Quantity

Price calculation

Basic price

104,87 €

C - Mounting length:
Quantity:

Order number: 803023-2111

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

Our screw-in thermocouple type J with B-head - AH is suitable for use in the high temperature...more

Close menu

Product information "Thermocouple Type J with B-Head - AH"

Our screw-in thermocouple type J with B-head - AH is suitable for use in the high temperature range up to 750 °C and is installed via the G1/2 " thread and the neck tube. The B-head with the protection sleeve and neck tube is designed according to DIN43772 and has a replaceable measuring insert.

Here you can find our downloads for the Thermocouple Type J with B-Head - AH

	Data sheet Thermocouple Type J with B-Head - AH
	Instruction manual Thermocouple Type J with B-Head - AH
	Operating instruction Thermocouple Type J with B-Head - AH
	Declaration of Conformity Thermocouple Type J with B-Head - AH

Screw-in thermocouple with head - General Information
Measuring range	-40 °C to +750 °C
Perm. (°C) conn. head	-40 °C to +100 °C
Accuracy	-40 °C to +375 °C: ±1,5 °C \| 375 °C to 750 °C: ±0,004 \|t\| according to DIN IEC 60584 Class 1

Screw-in thermocouple with head - Supply and output
Measuring element	Thermocouple Type J
Measuring point	Measuring point isolated
Measurement signal	Thermovoltage

Screw-in thermocouple with head - Ambient conditions
Protection class	IP54 according DIN 60529
Humidity and moisture condensation resistance	according to application-specific qualification

Screw-in thermocouple with head - Certificates and Standards
Standards	DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive	RoHS 2011/65/EU \| 2014/30/EU

Screw-in thermocouple with head - Technical Drawing

		C - Mounting length
		All dimensions in mm

Screw-in thermocouple with head - Protection sleeve
Thread
Length (mm)	14
Thread	G1/2 "
Wrench size	27
Material	Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}	6
Mounting length (mm)^2}	50, 100, 150, 200, 250, 300, 400, 500
^1} Tolerance ± 0,1 mm \| ^2} Tolerance ± 1%

Screw-in thermocouple with head - Connection head
Design	Form B
Material	Aluminium
W/H/Ø (mm)	76/82/70
Color	RAL 9006 aluminium silver
Cable gland	with strain relief
Cable electricial connection	Screw terminals max. 2,5mm²
Clamping range (mm)	4,8 to 13
Sensor unit	Replaceable, federn gelagert


Screw-in thermocouple with head - neck tube
Diameter (mm)	9
Length (mm)	80

Screw-in thermocouple with head - Delivery
Assembly instructions	by means of process connection
Delivery and Packaging	Probe, seperatly packaged in PE bag
Matching accessories	Immersion sleeve, Heat-conducting paste, Cable

Screw-in thermocouple with head - Important assembly advices
	Measuring errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deep as possible into the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, if an immersion sleeve is used, the Ø of the immersion sleeve. When installing in pipes whose Ø does not have a sufficiently deep installation depth, you should either install the probe at an angle or in a pipe elbow. Make sure that you have enough space so that the probe can be removed again. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
	Installation by using an immersion sleeve (4): Please ensure that the Ø and length of the immersion sleeve are selected to suit the installation situation so that the minimum immersion depth can be achieved. Please also ensure that the process connection is correct. Because the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected so that the protection sleeve touches the bottom of the immersion sleeve and the air cushion around the protection tube is as small as possible. The use of thermal conduction paste can improve the response times.
	Please lay the cable so that no water can penetrate the probe and with a spare loop (4). This allows you to extend the probe without disconnecting the electrical connection.

Properties

Thermocouple:	Type J Class 1
Temperature range:	-40 °C to +750 °C
Process connection:	G1/2 "
Connection head:	Form B
industry:	Automotive, Cement and building materials industry, Glass industry, Heating technology, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry, Waste recycling/incineration

Related links to "Thermocouple Type J with B-Head - AH"

Available downloads:

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Thermocouple Type J with B-Head - AH"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.