Cable thermocouple type K with PVC cable
Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)
Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)
Jeder Fühler benötigt eine Mindest-Eintauchtiefe, um die Temperatur des zu messenden Mediums annehmen und korrekt messen zu können. Faustformel: optimalerweise sollte die Eintauchtiefe 10-mal dem Schutzhülsendurchmesser entsprechen, mindest sollte jedoch ein 5-facher Wert verwendet werden.
Bei Temperaturmessungen in Festkörpern oder wenn der Fühler in einer Tauchhülse montiert ist, verlangsamt die den Fühler umgebende Luft die Wärmeleitung vom Medium zum Fühler. Dadurch wird auch die Temperaturmessung verlangsamt und führt im Extremfall zu falschen Temperaturmesswerten. Achten Sie bitte deshalb darauf, dass der Temperaturfühler wärmetechnisch bestmöglich an Ihr Messmedium angekoppelt ist, d.h. wählen Sie den Hülsendurchmesser so aus, dass der Luftspalt so klein wie möglich wird.
Bitte stellen Sie sicher, dass die technischen Daten der Anschlussleitung, insbesondere hinsichtlich Temperatur und IP-Schutzklasse, zu Ihrer Applikation passen. Detailierte Informationen finden Sie in unseren Datenblättern.
Temperaturbereiche unserer Leitungen:
PVC -30 °C bis +105 °C
Bitte beachten Sie den spezifizierten Temperaturbereich des Stecker / der Aderendenhülsen
isolierte Aderendhülsen: bis 80 °C
Mini-TE-Stecker: bis 220 °C
TE-Stecker: bis 220 °C
We can offer you calibration on request.
Further information on calibration can be found here.
Sie haben die gewünschte Kalibrierung nicht gefunden? Schreiben Sie uns gerne an webshop@testo-sensor.de.
Sie haben weitere Fragen oder möchten herausfinden, welche Kalibrierung die richtige für Ihren Temperaturfühler ist - dafür haben wir alle Informationen auf dieser Seite für Sie zusammengefasst. Temperaturfühler kalibrieren
| C - Length protection sleeve: | ||
| D - Diameter protection sleeve: | ||
| E - Material connection cable: | ||
| F - Length connection cable: | ||
| G - Connector: | ||
| H - Bend protection: | ||
| Calibration: | ||
| ISO-Calibration: | ||
| DAkkS-Calibration: | ||
| Quantity: |
- Order number: 803550-1211
Advantages
- We are ready to deliver: All information here
- Advice directly from experts
- Quality directly from the manufacturer
- Long-term stable temperature probes over years
- B2B customers welcome: All information here
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
Cable thermocouples with PVC cable are the most cost-efficient solution for many applications up to +105 °C. If other temperatures or higher flexibility are required, cables made of silicone, glass fibre or PFA are used.
Here you can find our downloads for the Cable thermocouple Type K with PVC cable
Cable thermocouple - General Information | |||||||||||||||||||
| Measuring range | -30 °C to +105 °C depending on chosen connection cable | ||||||||||||||||||
| Perm. °C range cable | -30 °C to +105 °C | ||||||||||||||||||
| Accuracy | -40 °C to +375 °C: ±1,5 °C according to DIN IEC 60584 Class 1 | ||||||||||||||||||
| Response time | on request | ||||||||||||||||||
| Pull-out force | ≥ 30 N | ||||||||||||||||||
Cable thermocouple - Supply and output | |||||||||||||||||||
| Measuring element | Thermocouple Type K | ||||||||||||||||||
| Measuring point | Measuring point isolated | ||||||||||||||||||
| Measurement signal | Thermovoltage | ||||||||||||||||||
Cable thermocouple - Ambient conditions | |||||||||||||||||||
| Protection class | IP65 according DIN 60529 | ||||||||||||||||||
| Humidity and moisture condensation resistance | according to application-specific qualification | ||||||||||||||||||
Cable thermocouple - Certificates and Standards | |||||||||||||||||||
| Standards | DIN EN 61326-1:2013 | DIN EN IEC 63000:2019-05 | ||||||||||||||||||
| Directive | RoHS 2011/65/EU | 2014/30/EU | ||||||||||||||||||
Cable thermocouple - Technical Drawing | |||||||||||||||||||
 | |||||||||||||||||||
| C - Length protection sleeve | |||||||||||||||||||
 | |||||||||||||||||||
| D - Diameter protection sleeve | |||||||||||||||||||
 | |||||||||||||||||||
| E - Material connection cable | |||||||||||||||||||
 | |||||||||||||||||||
| F - Length connection cable | |||||||||||||||||||
| H - Bend protection | |||||||||||||||||||
| |||||||||||||||||||
| G - Connector | |||||||||||||||||||
| All dimensions in mm | |||||||||||||||||||
Cable thermocouple - Protection sleeve | |||||||||||||||||||
| Diameter (mm)1} | 5, 6 |  | |||||||||||||||||
| Length (mm)2} | 30, 40, 50, 60, 100, 200 | ||||||||||||||||||
| 1} Tolerance ± 0,1 mm | 2} Tolerance length ≤ 100: ± 1 mm / length > 100: ± 1 % | |||||||||||||||||||
Cable thermocouple - Material and possible configuration | |||||||||||||||||||
| Length / Ø (mm) | 3 | 4 | 5 | 6 | |||||||||||||||
| 30 | not available | not available | Stainless steel 1.4404 | 316L | Stainless steel 1.4404 | 316L | |||||||||||||||
| 40 | not available | not available | Stainless steel 1.4404 | 316L | Stainless steel 1.4404 | 316L | |||||||||||||||
| 50 | not available | not available | Stainless steel 1.4404 | 316L | Stainless steel 1.4404 | 316L | |||||||||||||||
| 60 | not available | not available | not available | Stainless steel 1.4571 | 316TI | |||||||||||||||
| 100 | not available | not available | Stainless steel 1.4571 | 316TI | Stainless steel 1.4571 | 316TI | |||||||||||||||
| 200 | not available | not available | Stainless steel 1.4571 | 316TI | Stainless steel 1.4571 | 316TI | |||||||||||||||
| other protective sleeve lengths and Ø available on request | |||||||||||||||||||
Cable thermocouple - Thermocouple cable | |||||||||||||||||||
 | Type | Color | Material (Outside / Inside) | Perm. range °C | Ø Outside (mm) | Cross section (mm²) | Color strand | Ω / m | |||||||||||
| Thermocouple cable | Type K1} | PVC / PVC | -30 to +105 | 3,8 ± 0,2 | 0,22 | gn, wt | 4,502} | ||||||||||||
| Length (m) | 1, 2, 3, 4, 5, 10, 15, 20 | ||||||||||||||||||
| Insulation resistance: ≥ 100 MOhm at min. 100 VDC | 1}Color according to IEC 584 | 2}per thermocouple | Cable available as accessory | |||||||||||||||||||
Cable thermocouple - Connector | |||||||||||||||||||
 | Insulated end ferrules (50 mm) | ||||||||||||||||||
 | Mini-TC connector Type K gn | ||||||||||||||||||
 | Mini-TC connector Type K ye | ||||||||||||||||||
 | TC connector Type K gn | ||||||||||||||||||
 | TC connector Type K ye | ||||||||||||||||||
Cable thermocouple - Delivery | |||||||||||||||||||
| Assembly instructions | by using compression fitting or immersion sleeve | ||||||||||||||||||
| Delivery and Packaging | Probe, seperatly packaged in PE bag | ||||||||||||||||||
| Matching accessories | Immersion sleeve, Heat-conducting paste, Compression fitting, Thermocouple cable, Connectors, Couplings, Quick-release strap | ||||||||||||||||||
Cable thermocouple - Important assembly advices | |||||||||||||||||||
 | Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached | ||||||||||||||||||
| Installation by means of compression fitting: Please tighten the union nut of the compression fitting by hand as far as it will go (clearly noticeable). For compression fittings with PTFE pressure ring, please make a 1/4 turn with a wrench suitable for the width across flats. These compression fittings can be used several times in this way. In the case of compression fittings with stainless steel cutting ring, the compression fitting connects to the protection tube. This connection is pressure resistant up to 40 bar. However, the compression fitting can only be used once. It must also be tightened more firmly. Please tighten it with 1 3/4 turns. | |||||||||||||||||||
 | Mounting by using an immersion sleeve (4): Please note that the Ø and the length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected in such a way that the protection sleeve touches the bottom of the immersion sleeve and that the air cushion around the protection sleeve is as small as possible. The use of thermal paste can improve the response times. | ||||||||||||||||||
| Please lay the cable with reserve loop (4) and in such a way that no water can penetrate the sensor head. This allows you to extend the probe without disconnecting the electrical connection. | |||||||||||||||||||
| Thermocouple: | Type K Class 1 |
| Kalibrierung: | DAkkS-Kalibrierung, ISO-Kalibrierung |
| Temperature range: | -30 °C to +105 °C |
| Material cable: | PVC |
| industry: | Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Refrigeration, White goods |
- Download Datenblatt Kabel-Thermoelement Typ K mit PVC-Leitung
- Download Data Sheet Cable thermocouple type K with PVC cable
- Download Bedienungsansleitung Kabel-Thermoelement Typ K mit PVC-Leitung
- Download Konformitätserklärung Kabel-Thermoelement Typ K mit PVC-Leitung
- Download Kennlinie Thermoelement Typ K
- Download Characteristic thermocouple type K
- Download Betriebsanleitung Thermoelemente
- Download Operating instructions Thermocouple
Testo Sensor GmbH
Testo-Str. 1
D-79853 Lenzkirch
E-Mail: info@testo-sensor.de
