Immersion thermocouple type J with B-Head

Gerades Thermoelement Typ J mit B-Kopf Vorderansicht

Gerades Thermoelement Typ J mit B-Kopf Technische Zeichnung

Preview: Gerades Thermoelement Typ J mit B-Kopf Vorderansicht

Preview: Gerades Thermoelement Typ J mit B-Kopf Technische Zeichnung

€ 53,16 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Jetzt konfigurieren und bestellen

C - Einbaulänge

Image Changer

2.Calibration

We can offer you calibration on request.
Further information on calibration can be found here.

Calibration

ISO-Calibration

3-Point measurement (0 °C, 150 °C, 300 °C)

3-Point measurement (0 °C, 300 °C, 600 °C)

DAkkS-Calibration

3-Point measurement (-20 °C, 0 °C, 60 °C)

3-Point measurement (0 °C, 100 °C, 200 °C)

3.Wie viele Fühler benötigen Sie?

Menge

Price calculation

Basic price

€ 53,16

C - Einbaulänge:
Calibration:
ISO-Calibration:
DAkkS-Calibration:
Menge:

Order number: 803311-1111

Our Payments

Advantages

We are ready to deliver: All information here
Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

Our immersion probe Thermoelment type J with B-head can be used in process measurement...more

Close menu

Product information "Immersion thermocouple type J with B-Head"

Our immersion probe Thermoelment type J with B-head can be used in process measurement technology in a temperature range up to +750 °C directly in contact with the medium or using immersion sleeves. We offer brass or stainless steel immersion sleeves as well as mounting flanges and compression fittings made of different materials as accessories.

Here you can find our downloads for the Immersion thermocouple type J with B-Head

	Data sheet Immersion thermocouple type J with B-Head
	Instruction manual Immersion thermocouple type J with B-Head
	Operating instruction Immersion thermocouple Type J with B-Head
	Declaration of Conformity Immersion thermocouple type J with B-Head

Immersion thermocouple with head - General Information
Measuring range		-40 °C to +750 °C
Perm. (°C) conn. head		-40 °C to +100 °C
Accuracy		-40 °C to +375 °C: ±1,5 °C \| 375 °C to 750 °C: ±0,004 \|t\| according to DIN IEC 60584 Class 1
Response time		t63 / t99: information is available on request

Immersion thermocouple with head - Supply and output
Measuring element		Thermocouple Type J
Measuring point		Measuring point isolated
Measurement signal		Thermovoltage

Immersion thermocouple with head - Ambient conditions
Protection class		IP65 according DIN 60529
Humidity and moisture condensation resistance		according to application-specific qualification

Immersion thermocouple with head - Certificates and Standards
Standards		DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive		RoHS 2011/65/EU \| 2014/30/EU
Certificates		Certificate of suitability (on request)

Immersion thermocouple with head - Technical Drawing

			C - Mounting length
			All dimensions in mm

Immersion thermocouple with head - Protection sleeve
Material		Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}		6
Mounting length (mm)^2}		50, 100, 150, 200, 250, 300, 400, 500
^1} Tolerance ± 0,1 mm \| ^2} Tolerance ± 1% \| Please note: For this type the mounting length is 15 mm longer

Immersion thermocouple with head - Connection head
Design		Form B
Material		Aluminium
W/H/Ø (mm)		76/82/70
Color		RAL 9006 aluminium silver
Cable gland		with strain relief
Cable electricial connection		Screw terminals max. 2,5mm²
Clamping range (mm)		4,8 to 13
Sensor unit		Fixed


Immersion thermocouple with head - Delivery
Assembly instructions		by means of existing protection sleeve, mounting flange, thermowell or compression fitting.
Delivery and Packaging		Probe, seperatly packaged in PE bag
Matching accessories		Immersion sleeve, Heat-conducting paste, Compression fitting, Mounting flange, Cable

Immersion thermocouple with head - Important assembly advices
		Measuring errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the thermowell of your temperature sensor as deeply as possible into the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the thermowell or, when using a thermowell, the Ø of the thermowell. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should install the probe either at an angle or in a pipe elbow. Make sure that there is sufficient space for the sensor to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
		Installation by means of compression fitting: Please tighten the union nut of the compression fitting by hand as far as it will go (clearly noticeable). For compression fittings with PTFE pressure ring, please make a 1/4 turn with a wrench suitable for the width across flats. These compression fittings can be used several times in this way. In the case of compression fittings with stainless steel cutting ring, the compression fitting connects to the protection tube. This connection is pressure resistant up to 40 bar. However, the compression fitting can only be used once. It must also be tightened more firmly. Please tighten it with 1 3/4 turns.
		Mounting by means of mounting flange: Please make sure that the Ø of the mounting flange matches the Ø of the protective sleeve. For B-head fittings or very long protection sleeves, we recommend a stainless steel or aluminum mounting flange due to its stability.
		Mounting by means of immersion sleeve (4): Please note that the Ø and the length of the immersion sleeve must be selected to match the installation situation so that the minimum immersion depth can be achieved. Since the sensor is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The sensor should be selected so that the thermowell touches the bottom of the immersion sleeve and the air cushion around the thermowell is as small as possible. The use of thermal paste can improve the response times.
		Please lay the cable with reserve loop (5) and in such a way that no water can penetrate the sensor head. This allows you to extend the sensor without disconnecting the electrical connection.

Qualification measurement series to ensure the function of our temperature probes over their service life
	Robust even with temperature changes	Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more.
	Resistant to heat and humidity	Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.
	Long-term stable in any weather	Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.
	Robust even under high vibration load	Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g).
	Reliable in practice: high pull-out force	The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures.
	Efficient through short response time	Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.
	Corrosion-resistant even in salt spray	Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.
Applicable for this probe type

Properties

Thermocouple:	Type J Class 1
Temperature range:	-40 °C to +750 °C
Connection head:	Form B
industry:	Glass industry, Heating technology, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry

Related links to "Immersion thermocouple type J with B-Head"

Available downloads:

Read, write and discuss reviews...more

Close menu

Customer evaluation for "Immersion thermocouple type J with B-Head"

Write an evaluation

Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.