Delivery outside GER for business customers only
Quality directly from the manufacturer
Langzeitstabile Temperaturfühler über Jahre
Advice directly from experts
 

Plug-in transmitter 0-10 V

€ 41,31 *

Prices plus VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 6 Workdays to NL, BE, AT (GER -1 workdays)

Repeated order: check settings carefully and change if necessary.
Configure and order now
C - Mounting length
keine Auswahl
(C0050) 50 mm
(C0100) 100 mm
(C0150) 150 mm
(C0200) 200 mm
(C0250) 250 mm
(C0300) 300 mm
How many transmitter do you need?
Price calculation
Basic price
€ 41,31
C - Mounting length:  
Quantity:  
Configuration is incomplete - please check it!
  • 803312-1013
Our Payments
MasterCardPayPalInvoiceVISAPrepayment

Advantages

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
With our plug-in transmitter with the 0-10 V voltage output, you will find suitable immersion...more
Product information "Plug-in transmitter 0-10 V"

With our plug-in transmitter with the 0-10 V voltage output, you will find suitable immersion sleeves (stainless steel immersion sleeve for aggressive media) and mounting flanges in the accessories for quick and easy installation. The 0-10 V plug-in transmitter measures the temperature in liquid or gaseous media, has eight switchable measuring ranges and a housing with snap-on cover and IP 54.

Here you can find our downloads for Plug-in transmitter 0-10 V

pdf-download Data sheet Plug-in transmitter 0-10 V
pdf-download Instruction manual Plug-in transmitter 0-10 V
pdf-download Declaration of Conformity Plug-in transmitter 0-10 V
 

Plug-in transmitter with housing - Supply and output

Output 0 - 10 V
Power consumption < 1,0 VA / 24 V DC; < 2,2 VA / 24 V AC
Voltage supply 24 V AC / DC (± 10 %)
Connection type 3-Wire
 

Plug-in transmitter with housing - General information

Measuring range multi-range switching with 8 switchable measuring ranges
with manual zero point correction (± 10 K)
Sensor Pt1000 | Class B | DIN EN 60751
Temperature deviation typically ± 0.2 K at +25 °C
Load resistance Rl > 5 kOhm
Process connection by using an immersion sleeve or mounting flange
 

Plug-in transmitter with housing - Ambient conditions

Ambient temperature -30 °C to +70 °C
Permissible air humidity < 95 % r. H., non-precipitating air
 

Plug-in transmitter with housing - Certifications / Standards

Protection class III (nach EN 60 730)
Standards CE conformity
electromagnetic compatibility according to EN 61326
according to EMC Directive 2014/ 30/ EU
 

Plug-in transmitter with housing - Technical drawing

 

Plug-in transmitter with housing - Protection sleeve

Material Stainless steel 1.4571 | 316TI
Ø (mm) 6
Mounting length selectable (mm) 50, 100, 150, 200, 250, 300, 400
Other mounting lengths on request | tolerance ± 1 mm
 

Plug-in transmitter with housing - Gehäuse

Material Plastic, UV-resistant
Material polyamide, 30 % glass bead reinforced
Dimensions (L/W/H) (mm) 72 x 64 x 37,8
Color Traffic white (similar to RAL9016)
Electrical connection 0.14 - 1.5², via screw terminals on circuit board
Closure with snap cap
Screw connection Cable gland, Plastic, M20x1,5, Strain relief, replaceable, max. 10,4 mm Ø Inner
 

Plug-in transmitter with housing - Important assembly instructions

Measurement errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protective sleeve of your temperature sensor as deeply as possible in the medium to be measured when installing it. The optimum installation depth should be 10-15 times the Ø of the protective sleeve. Please make sure that you have enough space so that you can remove the sensor again if necessary.
Mounting by means of a mounting flange: Please ensure that the Ø of the mounting flange matches the Ø of the protective sleeve.
Mounting with immersion sleeve: Please make sure that the Ø and the length of the immersion sleeve match the installation situation so that the minimum immersion depth can be reached. Since the sensor is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The sensor should be selected so that the protective sleeve touches the bottom of the immersion sleeve and the air cushion around the protective tube is as small as possible. The use of thermal paste can improve the response times.
 

Plug-in transmitter with housing - Delivery & Packing

Delivery Transmitter, Operating instructions
Packing individually packed in PE bag
Properties
Type: Einsteck-Transmitter
Output: 0-10 V
Input: Pt1000
Gehäuse: Gehäuse ohne Display
Process connection: via mounting flange or immersion sleeve
Screw connection: Cable gland
Related links to "Plug-in transmitter 0-10 V"
Available downloads:
Read, write and discuss reviews...more
Customer evaluation for "Plug-in transmitter 0-10 V"
Write an evaluation
Jede Verbraucherbewertung wird vor ihrer Veröffentlichung auf ihre Echtheit überprüft, sodass sichergestellt ist, dass Bewertungen nur von Verbrauchern stammen, die die bewerteten Produkte auch tatsächlich erworben/genutzt haben. Die Überprüfung geschieht durch manuelle Überprüfung in Form eines Abgleichs der Bewertung mit der Bestellhistorie des Warenwirtschaftssystems, um einen vorangegangenen Produkterwerb zur notwendigen Bedingung für die Veröffentlichung zu machen.
Please enter these characters in the following text field.
I have taken note of the Privacy Policy.

The fields marked with * are required.

Einsteck-Transmitter 4-20 mA - Vorderansicht Plug-in transmitter 4-20 mA
€ 41,31 *
Order number: 803312-1012
Add to shopping cart
Einsteck-Transmitter High 0-10 V Vorderansicht Plug-in transmitter High 0-10 V
€ 57,24 *
Order number: 803312-2013
Add to shopping cart
Einsteck-Transmitter High 4-20 mA Vorderansicht Plug-in transmitter High 4-20 mA
€ 57,24 *
Order number: 803312-2012
Add to shopping cart
Einsteck-Transmitter High mit Display 0-10 V Vorderansicht Plug-in transmitter High with display 0-10 V
€ 86,34 *
Order number: 803312-3013
Add to shopping cart
Einsteck-Transmitter High mit Display 4-20 mA Vorderansicht Plug-in transmitter High with display 4-20 mA
€ 86,34 *
Order number: 803312-3012
Add to shopping cart