Air temperature probe with silicone cable

Lufttemperaturfühler mit PVC-Leitung - Vorderansicht

Lufttemperaturfühler mit Silikon-Leitung - Technische Zeichnung

Preview: Lufttemperaturfühler mit PVC-Leitung - Vorderansicht

Preview: Lufttemperaturfühler mit Silikon-Leitung - Technische Zeichnung

€31.89 *

Prices incl. VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 5 Workdays to GER (AT, NL, BE +1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configuration

A - Measuring element

B - Connection Type

C - Length protection sleeve

E - Material connection cable

F - Length connection cable

G - Connector

H - Bend protection

Image Changer

2.How many probes do you need?

Quantity

Price calculation

Basic price

€31.89

A - Measuring element:
B - Connection Type:
C - Length protection sleeve:
E - Material connection cable:
F - Length connection cable:
G - Connector:
H - Bend protection:
Quantity:

Order number: 803763-1011

Our Payments

Advantages

Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

Air temperature probes are used for temperature measurement in gaseous media such as air ducts.... more

Close menu

Product information "Air temperature probe with silicone cable"

Air temperature probes are used for temperature measurement in gaseous media such as air ducts. Our air probes with silicone cable can be used in the temperature range of -50 to +180°C. The temperature sensor sits in a perforated stainless steel sleeve that protects the sensor while providing a fast response time.

Here you can find our downloads for the Air temperature probe with silicone cable

	Data sheet Air temperature probe with silicone cable
	Instruction manual Air temperature probe with silicone cable
	Operating instruction Air temperature probe with silicone cable
	Declaration of Conformity Air temperature probe with silicone cable

Air probe - General Information
Measuring range				-50 °C to +180 °C depending on sensor Type and connection cable
Perm. °C range cable				-50 °C to +180 °C
Accuracy				depending on sensor Type
Response time				t63 / t99: information is available on request
Pull-out force				≥ 30 N

Air probe - Supply and output
Max. measurement current				max. 1 mA
Supply voltage				approx. 5 V depending on measurement current
Measurement signal				passive (resistance value)

Air probe - Ambient conditions
Protection class				none (measuring element is exposed)
Humidity and moisture condensation resistance				according to application-specific qualification

Air probe - Certificates and Standards
Standards				DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive				RoHS 2011/65/EU \| 2014/30/EU
Certificates				Certificate of suitability (on request)

Air probe - Technical Drawing

						A - Measuring element
						B - Connection Type
						C - Length protection sleeve

						E - Material connection cable
						F - Length connection cable
						H - Bend protection

						G - Connector
						All dimensions in mm

Air probe - Measuring element
Measuring element	Perm. range °C			Accuracy / Tolerance resistance
Pt100	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt100	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
Pt100	-50 °C to +200 °C			1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005\|t\|))^1}
Pt100	±0 °C to +100 °C			1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005\|t\|))^1}
Pt500	-70 °C to +500 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
NTC 5 kOhm	-40 °C to +125 °C			R25 = 5 KOhm ±1 %
NTC 10 kOhm	-40 °C to +125 °C			R25 = 10 KOhm ±1 %
NTC 20 kOhm	-40 °C to +125 °C			R25 = 20 KOhm ±1 %
Ni1000	-60 °C to +150 °C			-60 °C to 0 °C: dT = ±(0,4 °C + 0,028 · T) \| 0 °C to +150 °C: dT = ±(0,4 °C + 0,007 · T)
^1} according to IEC 751 / EN 60751 \| Please note that the measuring range depends on the measuring element and the connecting cable.

Air probe - Possible connections
Measuring element	2W	3W	4W
NTC
NI
Pt

Air probe - Protection sleeve
Material				Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}				6
Length (mm)^2}				100, 200
^1} Tolerance ± 0,1 mm \| ^2} Tolerance ± 1%

Air probe - Material connection cable
Color: red-brown, Perm. range °C: -50 to +180
	Material (Outside / Inside)			Ø Outside (mm)	Cross section (mm²)^2}	Color strand	Ω / m^1}
	Silicone / Silicone			4,7 ± 0,2	2 x 0,22	rd, wt	0,08
	Silicone / Silicone			4,9 ± 0,2	3 x 0,22	rd, wt, rd	0,08
	Silicone / Silicone			4,9 ± 0,2	4 x 0,22	rd, wt, rd, wt	0,08
Length (m)				1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC \| Cable available as accessory \| ^1} per single strand \| ^2} Tolerance ± 0,03 mm²

Air probe - Connector
				Insulated end ferrules (50 mm)

Air probe - Bend protection
		Version		Without (Standard), Metal bend protection
		Length (mm)		50
		Material		Stainless steel spring 1.4310 \| SUS 302

Air probe - Delivery
Assembly instructions				by using a compression fitting or immersion sleeve \| The exposed measuring element is sensitive to mechanical damage. Therefore, please do not press in the tip of the sleeve with your fingers or with a pointed object.
Delivery and Packaging				Probe, seperatly packaged in PE bag
Matching accessories				Compression fitting, Mounting flange

Qualification measurement series to ensure the function of our temperature probes over their service life
	Robust even with temperature changes			Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more.
	Resistant to heat and humidity			Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.
	Long-term stable in any weather			Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.
	Robust even under high vibration load			Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g).
	Reliable in practice: high pull-out force			The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures.
	Efficient through short response time			Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.
	Corrosion-resistant even in salt spray			Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.
Applicable for this probe type

Properties

Measuring element:	Ni1000, NTC 5 kOhm, NTC 10 kOhm, NTC 20 kOhm, Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range:	-50 °C to +180 °C
Connection type:	2-Wire, 3-Wire, 4-Wire
Material cable:	Silicone
industry:	Air conditioning and ventilation technology, Building automation, Heating technology, Machinery and apparatus engineering, Refrigeration

Related links to "Air temperature probe with silicone cable"

Available downloads:

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Air temperature probe with silicone cable"

Write an evaluation

Each consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed. The verification is carried out by manual checking in the form of a comparison of the rating with the order history of the merchandise management system in order to make a previous product purchase a necessary condition for publication.