Cross-band probe with counter nut

Kreuzbandfühler mit Kontermutter Vorderansicht

Kreuzbandfühler mit Kontermutter Technische Zeichnung

Preview: Kreuzbandfühler mit Kontermutter Vorderansicht

Preview: Kreuzbandfühler mit Kontermutter Technische Zeichnung

€186.24 *

Prices incl. VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 4 Workdays to GER (AT, NL, BE +1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configuration

E - Material connection cable

F - Length connection cable

G - Connector

H - Bend protection

2.How many probes do you need?

Quantity

Price calculation

Basic price

€186.24

E - Material connection cable:
F - Length connection cable:
G - Connector:
H - Bend protection:
Quantity:

Order number: 802913-1211

Our Payments

Advantages

Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

All our cross band probes are ideal for contact temperature measurement on surfaces. Their type... more

Close menu

Product information "Cross-band probe with counter nut"

All our cross band probes are ideal for contact temperature measurement on surfaces. Their type is developed for the fastest surface temperature measurements and ensures the shortest response times due to the filigree head design. With this type, you can quickly and easily integrate the probe into your process permanently and vibration-resistant via the continuous M14 thread. The probe is supplied with two matching nuts, making it particularly easy to install. The nuts allow you, for example, to simply lock the probe to a retaining plate. Order this probe with anti-kink spring if required.

Here you can find our downloads for the Cross-band probe with counter nut

	Data sheet Cross-band probe with counter nut
	Instruction manual Cross-band probe with counter nut
	Operating instruction Cross-band probe with counter nut
	Declaration of Conformity Cross-band probe with counter nut

Surface thermocouple - General Information
Measuring range			-40 °C to +180 °C permanent, short-term up to 400 °C - The measuring range depends on the cable.
Perm. °C range cable			see cable
Accuracy			-40 °C to +333 °C: ±2,5 °C according to DIN IEC 60584 Class 2
Response time			t63: < 0,8 s t99: < 3 s
Pull-out force			≥ 30 N

Surface thermocouple - Supply and output
Measuring element			Thermocouple Type K
Measuring point			Measuring point not isolated
Measurement signal			Thermovoltage

Surface thermocouple - Ambient conditions
Protection class			none (open measuring head)
Humidity and moisture condensation resistance			according to application-specific qualification

Surface thermocouple - Certificates and Standards
Standards			DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive			RoHS 2011/65/EU \| 2014/30/EU
Certificates			Certificate of suitability (on request)

Surface thermocouple - Technical Drawing

						E - Material connection cable
						F - Length connection cable

						H - Bend protection
						G - Connector

						All dimensions in mm

Surface thermocouple - Probe head
Contact geometry			Cross band (fitting)
Material			Stainless Steel 1.4305
Length (mm)			33
Perm. °C range			+ 180 °C
Thread probe head			M 14 x 1,5 (continuous thread)
Wrench size			22

Surface thermocouple - Thermocouple cable
	Type		Color	Material (Outside / Inside)	Perm. range °C	Ø Outside (mm)	Cross section (mm²)	Color strand	Ω / m
	Thermocouple cable		Type K^1}	PVC / PVC	-30 to +105	3,8 ± 0,2	0,22	gn, wt	4,50^2}
	Thermocouple cable		Type K^1}	FEP / Silicone	-50 to +180	3,6 ± 0,2	0,22	gn, wt	4,50^2}
	Thermocouple compensating cable		Type K^1}	FEP / FEP	-50 to +205	4,0 ± 0,2	0,22	gn, wt	4,50^2}
Length (m)			1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC \| ^1}Color according to IEC 584 \| ^2}per thermocouple \| Cable available as accessory

Surface thermocouple - Connector
			Insulated end ferrules (50 mm)
			Mini-TC connector Type K gn
			TC connector Type K gn

Surface thermocouple - Bend protection
		Version	Without (Standard), Metal bend protection
		Length (mm)	50
		Material	Stainless steel spring 1.4310 \| SUS 302

Surface thermocouple - Delivery
Delivery and Packaging			Probe, 2 x SW22 nuts, seperatly packaged in PE bag
Matching accessories			Cable

Surface thermocouple - Important assembly advices
			Our cross band probes measure the surface temperature. At the measuring point, the surface should be clean, flat and free of residues. If necessary, you can use thermal paste for better thermal coupling. Our probes are best suited for measurement on flat surfaces (1). For uneven or round surfaces, please make sure that the contact area is sufficiently large (2). If the measuring surface is too small (3), measurement errors may occur.
			The filigree cross tapes are sensitive to mechanical damage. Therefore, please do not press the measuring tapes in with your fingers or with a pointed object. Carefully place the cross band probes on the measuring point and press them lightly.
			Please lay the cable with reserve loop. In this way, you can extend the probe without disconnecting the electrical connection. If necessary, you should order the probe with bend protection to reduce the mechanical stress at the transition between cable and sleeve.
			This type has a through thread and is fastened with two counter nuts. To fix the probe at the measuring point, please loosen one of the two nuts and then position the probe at the required measuring point. Then tighten the two counter nuts to ensure secure fastening. When selecting the bore diameter at the installation point, please take into account the size of the thread and the counter nuts on the probe.

Qualification measurement series to ensure the function of our temperature probes over their service life
	Robust even with temperature changes		Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more.
	Resistant to heat and humidity		Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.
	Long-term stable in any weather		Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.
	Robust even under high vibration load		Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g).
	Reliable in practice: high pull-out force		The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures.
	Efficient through short response time		Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.
	Corrosion-resistant even in salt spray		Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.
Applicable for this probe type

Properties

Thermocouple:	Type K Class 2
Temperature range:	-40 °C to +180 °C
Material cable:	FEP, PVC, Silicone
industry:	Automotive, Cement and building materials industry, Glass industry, Machinery and apparatus engineering, Plastics industry, Power generation, Steel and iron industry, Waste recycling/incineration

Related links to "Cross-band probe with counter nut"

Available downloads:

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Cross-band probe with counter nut"

Write an evaluation

Each consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed. The verification is carried out by manual checking in the form of a comparison of the rating with the order history of the merchandise management system in order to make a previous product purchase a necessary condition for publication.