Outdoor temperature transmitter with display 4-20 mA

Our outdoor transmitter with 4-20 mA current output and display has the sensor in an external protective tube. The outdoor temperature transmitter with display 4-20 mA with the plastic housing with quick-locking screws has eight switchable measuring ranges, a two-line display and either a cable gland or an M12 connector in accordance with DIN EN 61076-2-101.

Here you can find our downloads for Outdoor temperature transmitter with display 4-20 mA

	Data sheet Outdoor temperature transmitter with display 4-20 mA
	Instruction manual Outdoor temperature transmitter with display 4-20 mA
	Declaration of Conformity Outdoor temperature transmitter with display 4-20 mA

Outdoor transmitter - Supply and output
Output					4 - 20 mA
Power consumption					< 1,0 VA / 24 V DC
Voltage supply					15 - 36 V DC
Connection type					2- or 3-wire connection (with/without display light)
Outdoor transmitter - General information
Measuring range					multi-range switching with 8 switchable measuring ranges Operating range: -30 °C to 70 °C with manual zero point correction (± 10 K)
Sensor					Pt1000 | Class B | DIN EN 60751
Temperature deviation					typically ± 0.2 K at +25 °C
Load					Ra (Ohm) = (Ub -14 V) / 0,02 A
Process connection					by screws
Outdoor transmitter - Ambient conditions
Ambient temperature					-30 °C to +70 °C
Permissible air humidity					< 95 % r. H., non-precipitating air
Outdoor transmitter - Certifications / Standards
Protection class					III (nach EN 60 730)
Protection type					IP 65 according to EN 60 529
Standards					CE conformity electromagnetic compatibility according to EN 61326 according to EMC Directive 2014/ 30/ EU
Outdoor transmitter - Technical drawing
M12 plug connector
Cable gland
Outdoor transmitter - Protection sleeve
Material					Stainless steel 1.4571 | 316TI
Ø (mm)					6
Length (mm)					65
Outdoor transmitter - Gehäuse
Material					Plastic, UV-resistant Material polyamide, 30 % glass bead reinforced
Dimensions (L/W/H) (mm)					Aluminum die casting
Color					Traffic white (similar to RAL9016)
Electrical connection					0.14 - 1.5², via screw terminals on circuit board
Display					Two lines, lighted For display of actual temperature and self-diagnostics (overrange, underrange, probe break, probe short-circuit)
Cut-out Display (B/H) (mm)					ca. 36 x 15
Closure					with quick release screws
Cover					transparent
Screw connection selectable					M12 plug connector Acc. DIN EN 617076-2-101 Cable gland, Plastic, M20x1,5, Strain relief, replaceable, max. 10,4 mm Ø Inner
Outdoor transmitter - Important assembly instructions
					Mount your outdoor transmitter with sufficient distance to vents, windows or doors and preferably on the north wall, alternatively on west or east wall of the building. Avoid direct sunlight and rain. Use Sun Protection if necessary. Please lay the cables downwards so that rainwater can drip off in a defined manner. Please take the permissible ambient conditions into account during installation.
Outdoor transmitter - Delivery & Packing
Delivery					Transmitter, Operating instructions
Packing					individually packed in PE bag