Cable probe stepped with PFA cable

Kabelfühler abgesetzt mit PFA-Leitung - Vorderansicht

Kabelfühler abgesetzt mit PFA-Leitung - Technische Zeichnung

Preview: Kabelfühler abgesetzt mit PFA-Leitung - Vorderansicht

Preview: Kabelfühler abgesetzt mit PFA-Leitung - Technische Zeichnung

€41.80 *

Prices incl. VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 4 Workdays to GER (AT, NL, BE +1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

A - Measuring element

B - Connection Type

C - Length protection sleeve

E - Material connection cable

F - Length connection cable

G - Stecker

H - Bend protection

Image Changer

2.How many probes do you need?

Quantity

Price calculation

Basic price

€41.80

A - Measuring element:
B - Connection Type:
C - Length protection sleeve:
E - Material connection cable:
F - Length connection cable:
G - Stecker:
H - Bend protection:
Quantity:

Order number: 803572-1011

Our Payments

Advantages

Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

A protection sleeve with a diameter of 3 mm is used for the cable probe with stepped measuring... more

Close menu

Product information "Cable probe stepped with PFA cable"

A protection sleeve with a diameter of 3 mm is used for the cable probe with stepped measuring tip. Different lengths are available. The transition sleeve has a diameter of 6 mm.

Here you can find our downloads for the Cable probe stepped with PFA cable

	Data sheet Cable probe stepped with PFA cable
	Instruction manual Cable probe stepped with PFA cable
	Operating instruction Cable probe stepped with PFA cable
	Declaration of Conformity Cable probe stepped with PFA cable

Cable probe - General Information
Measuring range				-50 °C to +260 °C depending on sensor Type and connection cable
Perm. °C range cable				-50 °C to +260 °C
Accuracy				depending on sensor Type
Response time				t50: ≤ 1 s \| t63: ≤ 1,5 s \| t90: ≤ 2 s *
Pull-out force				≥ 30 N
* Medium1: Air (25 °C) \| Medium2: Water (60°C) \| Flow velocity: 0.2 m/s \| Measuring element: Pt100 \| More information about response time measurement here

Cable probe - Supply and output
Max. measurement current				max. 1 mA
Supply voltage				approx. 5 V depending on measurement current
Measurement signal				passive (resistance value)

Cable probe - Ambient conditions
Protection class				IP42 according DIN 60529
Humidity and moisture condensation resistance				according to application-specific qualification

Cable probe - Certificates and Standards
Standards				DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive				RoHS 2011/65/EU \| 2014/30/EU

Cable probe - Technical Drawing

						A - Measuring element
						B - Connection Type
						C - Length protection sleeve

						E - Material connection cable
						F - Length connection cable
						H - Bend protection

						G - Connector
						All dimensions in mm

Cable probe - Measuring element
Measuring element	Perm. range °C			Accuracy / Tolerance resistance
Pt100	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt100	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
Pt100	-50 °C to +200 °C			1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005\|t\|))^1}
Pt100	±0 °C to +100 °C			1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005\|t\|))^1}
Pt500	-70 °C to +500 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
^1} according to IEC 751 / EN 60751 \| Please note that the measuring range depends on the measuring element and the connecting cable.

Cable probe - Possible connections
Measuring element	2W	3W	4W
Pt

Cable probe - Protection sleeve
Material				Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}				3
Length (mm)^2}				40, 50, 60, 100
^1} Tolerance ± 0,1 mm \| ^2} Tolerance length ≤ 100: ± 1 mm / length > 100: ± 1 %

Cable probe - Connection sleeve
Material				Stainless steel 1.4305 \| SUS 303
Diameter (mm)				6^1}
Length (mm)				40
^1}Tolerance ± 0,1 mm

Cable probe - Material connection cable
Color: white, Perm. range °C: -50 to +260
	Material (Outside / Inside)			Ø Outside (mm)	Cross section (mm²)^2}	Color strand	Ω / m^1}
	PFA / PFA			2,4 ± 0,2	2 x 0,22	rd, wt	0,09
	PFA / PFA			2,4 ± 0,2	3 x 0,22	rd, wt, rd	0,09
	PFA / PFA			2,7 ± 0,2	4 x 0,22	rd, wt, rd, wt	0,09
Length (m)			1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC \| Cable available as accessory \| ^1} per single strand \| ^2} Tolerance ± 0,03 mm²

Cable probe - Connector
				Insulated end ferrules (50 mm)

Cable probe - Bend protection
		Version		Without (Standard), Metal bend protection
		Length (mm)		50
		Material		Stainless steel spring 1.4310 \| SUS 302

Cable probe - Delivery
Assembly instructions				by using an immersion sleeve or a compression fitting.
Delivery and Packaging				Probe, seperatly packaged in PE bag
Matching accessories				Immersion sleeve, Heat-conducting paste, Compression fitting, Quick-release strap

Cable probe - Important assembly advices
				Measuring errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deeply as possible in the medium to be measured. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, when using an immersion sleeve, the Ø of the immersion sleeve. When installing in pipelines whose Ø does not have a sufficiently deep installation depth, you should either install the probe at an angle or in a pipe elbow. Make sure that there is sufficient space for the probe to be removed. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
				Installation by means of compression fitting: Please tighten the union nut of the compression fitting by hand as far as it will go (clearly noticeable). For compression fittings with PTFE pressure ring, use a wrench that matches the wrench size and make a 1/4 turn. These compression fittings can be used several times in this way. In the case of compression fittings with a stainless steel cutting ring, the compression fitting connects to the protective tube. This connection is pressure-resistant up to 40 bar. However, the compression fitting can only be used once. It must also be tightened more firmly. Please tighten it with 1 3/4 turns.
				Mounting by using an immersion sleeve (4): Please note that the diameter and length of the immersion sleeve must be selected to suit the installation situation so that the minimum immersion depth can be achieved. Since the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected so that the protection sleeve touches the bottom of the immersion sleeve and the air cushion around the protection tube is as small as possible. The use of thermal conduction paste can improve the response times.
				Please lay the cable with a reserve loop (4) and in such a way that no water can penetrate the sensor head. This will allow you to extend the probe without disconnecting the electrical connection.

Properties

Measuring element:	Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range:	-50 °C to +260 °C
Connection type:	2-Wire, 3-Wire, 4-Wire
Material cable:	PFA
industry:	Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Refrigeration, White goods

Related links to "Cable probe stepped with PFA cable"

Available downloads:

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Cable probe stepped with PFA cable"

Write an evaluation

Each consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed. The verification is carried out by manual checking in the form of a comparison of the rating with the order history of the merchandise management system in order to make a previous product purchase a necessary condition for publication.